M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#8884
Subbro stor D2: dev
[M8]
If ",D1" to ",D4" is designated in a subprogram call, the called program will be searched from the storage (de-
vice and directory) set by this parameter.
(Example) M98 P (program No.), D0
[Device] "#8880 Subpro stor D0: dev", [Directory] "#8881 Subpro stor D0: dir"
The device and directory above will be searched.
(Note 1) If the called subprogram is not found, a program error will occur.
(Note 2) If there is no designation of D0 to D4, search is done according to the settings #8890 to #8894.
(Note 3) G:HD are available for M800W only.
---Setting range---
M: Memory
G: HD
R: Memory card
D: Data server
N: USB Memory
#8885
Subpro stor D2: dir
[M8]
Select the storage destination (directory) for the subprogram.
When D2 is designated at a subprogram call, the subprogram to be called will be searched from the directory
selected with this parameter.
Refer to "#8884 Subpro stor D2: dev".
---Setting range---
Directory 48 characters
#8886
Subbro stor D3: dev
[M8]
If ",D1" to ",D4" is designated in a subprogram call, the called program will be searched from the storage (de-
vice and directory) set by this parameter.
(Example) M98 P (program No.), D0
[Device] "#8880 Subpro stor D0: dev", [Directory] "#8881 Subpro stor D0: dir"
The device and directory above will be searched.
(Note 1) If the called subprogram is not found, a program error will occur.
(Note 2) If there is no designation of D0 to D4, search is done according to the settings #8890 to #8894.
(Note 3) G:HD are available for M800W only.
---Setting range---
M: Memory
G: HD
R: Memory card
D: Data server
N: USB Memory
#8887
Subpro stor D3: dir
[M8]
Select the storage destination (directory) for the subprogram.
When D3 is designated at a subprogram call, the subprogram to be called will be searched from the directory
selected with this parameter.
Refer to "#8886 Subpro stor D3: dev".
---Setting range---
Directory 48 characters
275
IB-1501279-H