Mitsubishi Electric M800 Series Manual page 405

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#1166 fixpro
Select a type of program dealt on the edit/program list/data in/out screen, general program, fixed cycle, or
machine tool builder macro program.
0: General programs can be edited, etc.
1: Fixed cycles can be edited, etc.
Password No.: The machine tool builder macro programs can be edited, etc.
---Setting range---
0 to 99999999
#1167 e2rom
Not used. Set to "0".
#1168 test
Select the test mode for the control unit.
In the test mode, test is performed with a hypothetical reference position return complete even though the
real reference position return hasn't been completed. This is limited to test operation of the control unit itself,
and must not be used when the machine is connected.
0: Normal operation mode
1: Test mode
#1217 aux01
Not used. Set to "0".
IB-1501279-H
Fixed cycle editing
Simulation test
388