Mitsubishi Electric M800 Series Manual page 722

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
(PR) #51582 EMG_Dev1_ch
Specify the No. of I/O channel to connect the safety I/O unit that receives the emergency stop signal. When
specifying the channel No. and station No. of the emergency stop signal, set any of the safety I/O units spec-
ified by the parameters RIO CH No. and RIO Station No. When set to 0, the designation of emergency stop
signal device by EMG_Dev1 is disabled, irrespective of the settings of EMG_Dev1_stn and EMG_Dev1_bit.
---Setting range---
[M8]
0 to 3
[C80]
0,1
(PR) #51583 EMG_Dev1_stn
Specify the No. of station to connect the safety I/O unit that receives the emergency stop signal.
---Setting range---
[M8]
0 to 63
[C80]
0 to 3
(PR) #51584 EMG_Dev1_bit
Specify the bit No. of the safety I/O unit that receives the emergency stop signal.
---Setting range---
[M8]
0 to 7
[C80]
0 to 31
(PR) #51585 EMG_Dev2_ch
Specify the No. of I/O channel to connect the safety I/O unit that receives the emergency stop signal. When
specifying the channel No. and station No of the emergency stop signal, set any of the safety I/O units spec-
ified by the parameters RIO CH No. and RIO Station No. When set to 0, the designation of emergency stop
signal device by EMG_Dev2 is disabled, irrespective of the settings of EMG_Dev2_stn and EMG_Dev2_bit.
---Setting range---
[M8]
0 to 3
[C80]
0,1
(PR) #51586 EMG_Dev2_stn
Specify the No. of station to connect the safety I/O unit that receives the emergency stop signal.
---Setting range---
[M8]
0 to 63
[C80]
0 to 3
(PR) #51587 EMG_Dev2_bit
Specify the bit No. of the safety I/O unit that receives the emergency stop signal.
---Setting range---
[M8]
0 to 7
[C80]
0 to 31
Emergency stop signal 1 channel No.
Emergency stop signal 1 station No.
Emergency stop signal 1 bit No.
Emergency stop signal 2 channel No.
Emergency stop signal 2 station No.
Emergency stop signal 2 bit No.
705 IB-1501279-H