Dev4 Device Name; Dev4 Baud Rate; Dev4 Stop Bit; Dev4 Parity Check - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#9501

DEV4 DEVICE NAME

[M8]
Set the device name corresponding to the device No.
Set a simple name for quick identification.
---Setting range---
Use alphabet characters, numerals and symbols to set a name within 3 characters.
#9502

DEV4 BAUD RATE

[M8]
Select the serial communication speed.
0: 19200 (bps)
1: 9600
2: 4800
3: 2400
4: 1200
5: 600
6: 300
7: 110
#9503

DEV4 STOP BIT

[M8]
Select the stop bit length used in the start-stop system.
Refer to "#9504 DEV4 PARITY CHECK". At the output of data, the number of characters is always adjusted
to for the parity check.
1: 1 (bit)
2: 1.5
3: 2
#9504

DEV4 PARITY CHECK

[M8]
Select whether to add a parity check bit to the data.
ON
OFF
Start bit
Set this parameter in accordance with the I/O device specifications.
0: Not add a parity bit in I/O mode
1: Add a parity bit in I/O mode
#9505 DEV4 EVEN PARITY
[M8]
Select whether even or odd parity will be used when parity is used. This parameter is ignored when no parity
is added.
0: Odd parity
1: Even parity
1character
b1 b2 b3 b4 b5 b6 bn
Data bit Parity bit Stop bit
247 IB-1501279-H