M800/M80/E80/C80 Series Alarm/Parameter Manual
14 Multi CPU Errors (A) [C80]
A01
Module configuration error
Details
There is a mounted module that is not supported, or there is a mounted module that is not supported by
the network type (module model name) set in system parameters ("I/O Assignment Setting").
Remedy
Remove the unsupported module if any.
Check whether modules are supported by the network type (module model name) set in the system pa-
rameters.
If all the modules are supported, the possible cause is a hardware failure of the CPU module, base unit, I/
O module, or intelligent function module. Please consult your local Mitsubishi representative.
A01
CPU module configuration error
Details
In the multiple CPU system, the control CPU of the Q series intelligent function module incompatible with
the multiple CPU system is set to other than CPU No.1.
Remedy
Replace the Q series intelligent function module with the one (function version B) compatible with the mul-
tiple CPU system.
Set the control CPU of the Q series intelligent function module incompatible with the multiple CPU system
to CPU No.1.
A01
CPU module configuration error
Details
The number of CPU modules set in the system parameters ("I/O Assignment Setting") differs from the
number of CPU modules actually mounted.
The CPU module is mounted on the slot different from the one specified in the system parameters (I/O
assignment setting).
Remedy
Correctly set the number of CPU modules (including the empty setting) in the system parameters in accor-
dance with the number of CPU modules actually mounted.
Correctly set the system parameters so that the setting and actual CPU module mounting status will be
the same.
A01
CPU module configuration error
Details
The CPU module is not mounted on the slot that is set for the CPU module in the system parameters ("I/
O Assignment Setting").
The CPU module is mounted on the slot that is set for empty in the system parameters ("I/O Assignment
Setting").
An I/O module or intelligent function module is mounted between the CPU modules.
Remedy
Correctly set the number of CPU modules (including the empty setting) in the system parameters in accor-
dance with the number of CPU modules actually mounted.
Remove the I/O module or intelligent function module mounted between the CPU modules.
A01
CPU module configuration error
Details
The CPU module is mounted on the inapplicable slot.
Remedy
Mount the CPU module on the applicable slot (CPU slot or I/O slot 0 to 6).
Remove the CPU module from the inapplicable slot.
181
2020
2021
2040
2041
2043
IB-1501279-H