Edit-Up/Down Keys; Interactive Cycle - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#8985 CheckSmltns$4Invld
[M8]
In the check method 2 of graphic check, checking for 4th part system is invalid.
0: Enable the check. (4th part system is the check target)
1: Disable the check. (4th part system is not the check target)
#8986 CheckSmltns$5Invld
[M8]
In the check method 2 of graphic check, checking for 5th part system is invalid.
0: Enable the check. (5th part system is the check target)
1: Disable the check. (5th part system is not the check target)
#8987 CheckSmltns$6Invld
[M8]
In the check method 2 of graphic check, checking for 6th part system is invalid.
0: Enable the check. (6th part system is the check target)
1: Disable the check. (6th part system is not the check target)
#8988 CheckSmltns$7Invld
[M8]
In the check method 2 of graphic check, checking for 7th part system is invalid.
0: Enable the check. (7th part system is the check target)
1: Disable the check. (7th part system is not the check target)
#8989 CheckSmltns$8Invld
[M8]
In the check method 2 of graphic check, checking for 8th part system is invalid.
0: Enable the check. (8th part system is the check target)
1: Disable the check. (8th part system is not the check target)
(PR) #8990

Edit-up/down keys

[M8]
At the time of normal edit, specify the operation with up and down cursor keys in the block on the several
lines.
0: Moves by line number
1: Moves by line on display
(Note) For mass-editing, the operation is always as "1" setting.
[C80]
Not used.
(PR) #8991

Interactive cycle

[M8]
Select whether to enable the interactive cycle insertion function.
0: Disable
1: Enable
[C80]
Not used.
IB-1501279-H 312