Configuring The H.248-Based Voice Service (Through The Cli) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
----End
12.3.6 Configuring the H.248-based Voice Service (Through the
CLI)
The OLT manages ONUs and applies VoIP configurations to the ONU using the OMCI protocol.
This topic describes how to configure the H.248-based voice service.
Prerequisite
l
l
Issue 01 (2014-04-30)
8. Check the ONU connection status.
In the navigation tree, choose Status > WAN Information. In the right pane,
Status is Connected and the obtained IP address is displayed at IP Address.
9. Check the registration status of a voice user.
In the navigation tree, choose Status > VoIP Information. In the right pane, User
Status is Up.
The interface data and POTS port data corresponding to the MG interface have been
configured on the MGC.
The OLT has been connected to the MGC. The OLT can ping the IP address of the MGC
server successfully.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 FTTO Configuration(SOHO and SME)
1114