Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 753

SORTER> OPTION
BUF-THK1 Set No. of buffer for hvy ppr 1: Fin-A1
Lv.1 Details To set the number of heavy paper 1 (91 to 180g/m2) for buffer.
When 1 is set, productivity of staple mode of Finisher is improved.
Use case When prioritizing productivity of staple mode of Finisher using heavy
paper 1
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: 2 sheets, 1: 3 sheets
Default value 0
PRD-PRTY Prdctvty prrty btch at sort/staple:Fin-A
Lv.1 Details To simultaneously set productivity priority.
When 1 is set, productivity of sort and staple mode of Finisher's
corresponding items is improved.
Use case When prioritizing productivity of sort and staple mode of Finisher
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Normal, 1: Priority on productivity
Default value 0
SLD-BCK Set bleed-thru improvement mode: Fin-A1
Lv.1 Details When the back of the coated paper as the cover is soiled, set 1/2.
Use case When the back of paper is soiled while coated paper is used as
cover
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Productivity is improved, but jam or misalignment might occur.
Display/adj/set range 0 to 2
0: OFF, 1: ON (Coated paper + Recycled paper), 2: ON (Coated
paper +Plain paper)
Default value 0
STCR-DWN Set occasional misalign prev mode:Fin-B1
Lv.1 Details When misalignment in feed direction occurs at approx. every 30
sheets for thin/plain paper (105g/m2 and less), set 1.
Use case When misalignment in feed direction occurs occasionally for thin/
plain paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
T-5-98
5
5-525