Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 640

COPIER> OPTION> INT-FACE
CNT-TYPE Connection setting of print server
Lv.1 Details To switch print server to be connected.
Specify print server with EFI controller ID.
Use case At installation of print server
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 999
442: imagePASS-A1, 443: ColorPASS-GX300
Default value 1
AUTHMODE Setting to allow print server connection
Lv.2 Details To set whether to permit the print server connection prohibited
models to connect the printer server.
When "0: Disabled" is set, even if a machine is connected to the print
server, it is not activated correctly and fails to make prints.
When "1: Enabled" is set, specific models only can be connected to
the print server.
Use case For customization
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
5
5-412
■ LCNS-TR
ST-SEND
Lv.2 Details
Use case
Adj/set/operate method 1) Select ST-SEND.
Display/adj/set range
Default value
TR-SEND
Lv.2 Details
Use case
Adj/set/operate method 1) Select ST-SEND.
Display/adj/set range
T-5-76
ST-ENPDF
Lv.2 Details
Use case
Adj/set/operate method 1) Select ST-ENPDF.
Display/adj/set range
Default value
TR-ENPDF
Lv.2 Details
Use case
Adj/set/operate method 1) Select ST-ENPDF.
Caution
Display/adj/set range
COPIER> OPTION> LCNS-TR
Installation state dis of SEND function
To display installation state of SEND function when transfer is
disabled.
When checking whether SEND function is installed
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-SEND.
When operation finished normally: OK!
0
Trns license key dis of SEND function
To display transfer license key to use SEND function when transfer is
disabled.
• When replacing HDD
• When replacing the device
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-SEND.
24 digits
Installation state dis of Encryption PDF
To display installation state of Encryption PDF when transfer is
disabled.
When checking whether Encryption PDF is installed
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-ENPDF.
When operation finished normally: OK!
0
Trns license key dis of Encryption PDF
To display transfer license key to use Encryption PDF when transfer
is disabled.
• When replacing HDD
• When replacing the device
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-ENPDF.
This mode is enabled when SEND function is installed.
24 digits