Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 738

PFLTRRZ1 Adj of LTRR Z-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of LTRR paper Z-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PFLTRRZ2 Adj of LTRR Z-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of LTRR paper Z-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-A4RC1 Adj of A4R C-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of A4R paper C-fold position on Paper
Folding Unit.
5
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -30 to 75
Unit 0.5 mm
Appropriate target value 0
Default value 0
5-510
SORTER> ADJUST SORTER> ADJUST
PF-A4RC2 Adj of A4R C-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of A4R paper C-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -75 to 45
Unit 0.5 mm
Appropriate target value 0
Default value 0
PFLTRRC1 Adj of LTRR C-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of LTRR paper C-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -30 to 75
Unit 0.5 mm
Appropriate target value 0
Default value 0
PFLTRRC2 Adj of LTRR C-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of LTRR paper C-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -75 to 45
Unit 0.5 mm
Appropriate target value 0
Default value 0