Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 530

■ MISC-P
COPIER> FUNCTION> MISC-P
P-PRINT Output of service mode setting value
Lv.1 Details To print the service mode setting value.
Use case Before executing the CLEAR service mode, etc.
Adj/set/operate method 1) Place paper in Cassette 1.
2) Select the item, and then press OK key.
Caution Be sure to use A4/LTR size plain paper/recycled paper.
Required time Approx. 120 seconds
Supplement/memo It takes approximately 15 seconds before printing starts.
MAIN-DRV Adj of user mode Drum cleaning time
Lv.2 Details To adjust the duration to execute cleaning of the Photosensitive
Drum to be performed by the user mode.
The Photosensitive Drum and ITB perform idle rotation for the
specified period of time without high voltage applied.
Use case • Upon user's request
• When image smear occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When the period is too long, flip occurs on the Drum Cleaning Blade
or the blade is getting close to the end of life.
Unit Second
Default value 30
Related user mode Adjustment/Maintenance> Maintenance> Clean Drum
KEY-HIST Output of Ctrl Panel key entry history
Lv.1 Details To print the key input history on the Control Panel.
Use case When printing the key input history on the Control Panel
Adj/set/operate method 1) Place paper in Cassette 1.
5
2) Select the item, and then press OK key.
Caution Be sure to use A4/LTR size plain paper/recycled paper.
Required time Approx. 40 seconds
HIST-PRT Output of jam and error history
Lv.1 Details To print the jam history and error history.
Use case When printing the jam/error history
Adj/set/operate method 1) Place paper in Cassette 1.
2) Select the item, and then press OK key.
Caution Be sure to use A4/LTR size plain paper/recycled paper.
Required time Approx. 30 seconds
TRS-DATA Moving memory reception data to Inbox
Lv.2 Details To move the data received in memory to Inbox.
Use case When moving the data received in memory to Inbox
Adj/set/operate method Select the item, and then press OK key.
5-302
COPIER> FUNCTION> MISC-P
USER-PRT Output of user mode list
Lv.1 Details To print the user mode list.
Use case When printing the user mode list
Adj/set/operate method 1) Place paper in Cassette 1.
2) Select the item, and then press OK key.
Caution Be sure to use A4/LTR size plain paper/recycled paper.
Required time Approx. 35 seconds
Supplement/memo It takes approximately 3 seconds before printing starts.
LBL-PRNT Output of service label
Lv.1 Details To print the service label.
Use case When printing the service label
Adj/set/operate method 1) Place paper in Cassette 1.
2) Select the item, and then press OK key.
Caution Be sure to use A4/LTR size plain paper/recycled paper.
Required time Approx. 55 seconds
Supplement/memo It takes approximately 15 seconds before printing starts.
PRE-EXP Light-up of Pre-exposure LED
Lv.1 Details To light up the Cleaning Pre-exposure LED (Y/M/C/Bk).
Open the Front Cover, and check that the LEDs light up visually.
It automatically stops after all light up.
Use case When checking that the Pre-exposure LEDs light up
Adj/set/operate method Select the item, and then press OK key.
Caution Drum memory may occur, so be sure not to execute this item
frequently.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time Approx. 30 seconds
D-PRINT Output of service mode (DISPLAY)
Lv.1 Details To output items displayed by DISPLAY in the service mode .
Items output by P-PRINT, LBL-PRNT and HIST-PRT and ALARM are
excluded.
Adj/set/operate method 1) Place paper in Cassette 1.
2) Select the item, and then press OK key.
Caution Be sure to use A4/LTR size plain paper/recycled paper.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time Approx. 45 seconds
1ATVC-EX Execute of primary transfer ATVC control
Lv.1 Details To execute the primary transfer ATVC control to optimize the primary
transfer voltage.
Use case • At occurrence of the primary transfer failure
• When replacing the Primary Transfer Roller and ITB
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time Approx. 3.5 seconds