Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 590

COPIER> OPTION> FEED-SW
REG-SPD Speed adj of Rgst Roller: plain paper
Lv.2 Details To adjust the Registration Roller speed when 1/1 speed is set for
plain paper, etc.
Increase the value if the image at the leading edge of paper shrinks
in the feeding direction, and decrease the value if it expands.
Decrease the value if wavy-line image occurs.
If these symptoms are not alleviated after adjustment is made,
replace the Registration Roller.
Display/adj/set range -30 to 30
Unit 0.001
Default value 0
Related service mode COPIER> OPTION> FEED-SW> REG-SPD2, REG-SPD3
INSRT-SW Insert ppr presence/absence jdgmt ON/OFF
Lv.1 Details To set ON/OFF of paper presence/absence judgment of the Inserter.
When 1 is set, a job is started before the Inserter starts paper
detections so productivity is improved..
Use case Upon user's request (improvement of productivity when using the
Inserter)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution If there is no insertion sheet in the Inserter while 1 is set, pages will
be out of order. Consequently, a lot of papers being fed from the host
machine will be handled as jam papers.
Display/adj/set range 0 to 1
0: ON (starting pickup after confirming the presence of papers)
1: OFF (starting pickup without judging paper presence and absence)
Default value 0
5
PINT-REG Set ppr intvl img pstn crrct frequency
Lv.2 Details To set the paper interval for executing the paper interval image
position correction control.
As the paper interval is larger (low frequency of execution), color
displacement tends to occur.
This control is executed at warm-up rotation to be performed first
time for the day and after jam processing regardless the setting
value.
Use case Upon user's request (shortening the time required for paper interval
control)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When increasing the paper interval, confirm the tolerance of color
displacement with the user.
Display/adj/set range 0 to 5
0: 1000 sheets, 1: 200 sheets, 2: 600 sheets, 3: 800 sheets, 4: 2000
sheets, 5: no correction
Default value 0
5-362
COPIER> OPTION> FEED-SW
DK2-TURN ON/OFF of Left Deck Pickup Rol last rotn
Lv.1 Details To set whether to execute last rotation of the Pickup Roller on the
Left Deck for 50 msec after completion of job.
As the usage is extended, a part of the Separation Roller engaged
with the Pickup Roller becomes worn and the roller stops rotation.
As a result of that, jam may occur. By rotating the Pickup Roller after
completion of job, it can reduce wear of the Separation Roller.
Use case • When frequency of use is relatively low
• When pickup jam tends to occur
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-TURN, DK3-TURN, DK4-
TURN, DK5-TURN, DK6-TURN, DK7-TURN
DK3-TURN ON/OFF of Cassette3 Pickup Rol last rotn
Lv.1 Details To set whether to execute last rotation of the Pickup Roller on the
Cassette 3 for 50 msec after completion of job.
As the usage is extended, a part of the Separation Roller engaged
with the Pickup Roller becomes worn and the roller stops rotation.
As a result of that, jam may occur. By rotating the Pickup Roller after
completion of job, it can reduce wear of the Separation Roller.
Use case • When frequency of use is relatively low
• When pickup jam tends to occur
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-TURN, DK2-TURN, DK4-
TURN, DK5-TURN, DK6-TURN, DK7-TURN
DK4-TURN ON/OFF of Cassette4 Pickup Rol last rotn
Lv.1 Details To set whether to execute last rotation of the Pickup Roller on the
Cassette 4 for 50 msec after completion of job.
As the usage is extended, a part of the Separation Roller engaged
with the Pickup Roller becomes worn and the roller stops rotation.
As a result of that, jam may occur. By rotating the Pickup Roller after
completion of job, it can reduce wear of the Separation Roller.
Use case • When frequency of use is relatively low
• When pickup jam tends to occur
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-TURN, DK2-TURN, DK3-
TURN, DK5-TURN, DK6-TURN, DK7-TURN