Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 306

COPIER> DISPLAY> FIXING
FX-MTR7 Dis Fix Motor crrnt VL history: 93mm/s
Lv.2 Details To display the maximum and latest Fixing Motor current values at
process speed of 93 mm/sec.
Display an alarm (06-0004) when the value is 90 (0.9 A) and higher,
and display an error (E008-001) when the value is 100 (1.0 A) and
higher.
Use case When investigating the drive torque at the Pressure Belt Unit
replacement or error occurrence
Adj/set/operate method N/A (display only)
Caution Press the Clear key at FX-BLT-L when replacing the Pressure Belt
Unit. For other than the replacement, execute FX-L-CLR to reset.
Display/adj/set range 0 to 500, 0 to 500
Unit 10 mA
Related service mode COPIER> FUNCTION> CLEAR> FX-L-CLR
COPIER> COUNTER> DRBL-1> FX-BLT-L
FX-MTR8 Dis Fix Motor crrnt VL history: 32mm/s
Lv.2 Details To display the maximum and latest Fixing Motor current values at
process speed of 32 mm/sec.
Display an alarm (06-0004) when the value is 70 (0.7 A) and higher,
and display an error (E008-001) when the value is 80 (0.8 A) and
higher.
Use case When investigating the drive torque at the Pressure Belt Unit
replacement or error occurrence
Adj/set/operate method N/A (display only)
Caution Press the Clear key at FX-BLT-L when replacing the Pressure Belt
Unit. For other than the replacement, execute FX-L-CLR to reset.
Display/adj/set range 0 to 500, 0 to 500
5
Unit 10 mA
Related service mode COPIER> FUNCTION> CLEAR> FX-L-CLR
COPIER> COUNTER> DRBL-1> FX-BLT-L
FX-U-STR Dis Fix Belt displace ctrl steer set VL
Lv.2 Details To display the latest steering setting value (upward, downward) for
the Fixing Belt displacement control.
Use case When checking the Fixing Belt displacement control
Adj/set/operate method N/A (display only)
Caution When replacing the Fixing Belt Unit, press the Clear key at FX-BLT-U
to reset.
Display/adj/set range 0 to 10, 0 to 10
Related service mode COPIER> COUNTER> DRBL-1> FX-BLT-U
5-78
COPIER> DISPLAY> FIXING
FX-U-TM1 Dis Fix Belt Uni STBY total running time
Lv.2 Details To display the total value of Fixing Belt Unit's "STBY-equivalent
running time" at all process speeds.
Display an alarm at 50400000 seconds (14000 hours), and display
an error (E008-002) at 54000000 seconds (15000 hours).
"STBY-equivalent running time" is proportional to the rotations.
Use case When checking the use history at the Fixing Belt Unit replacement or
error occurrence
Adj/set/operate method N/A (display only)
Caution When replacing the Fixing Belt Unit, press the Clear key at FX-BLT-U
to reset.
Display/adj/set range 0 to 4294967295
Unit Second
Related service mode COPIER> COUNTER> DRBL-1> FX-BLT-U
FX-U-TM2 Dis Fix Belt Unit running time: 321mm/s
Lv.2 Details To display the running time of the Fixing Belt Unit at process speed
of 321mm/sec.
Use case When checking the use history at the Fixing Belt Unit replacement or
error occurrence
Adj/set/operate method N/A (display only)
Caution When replacing the Fixing Belt Unit, press the Clear key at FX-BLT-U
to reset.
Display/adj/set range 0 to 4294967295
Unit Second
Related service mode COPIER> COUNTER> DRBL-1> FX-BLT-U
FX-U-TM3 Dis Fix Belt Unit running time: 280mm/s
Lv.2 Details To display the running time of the Fixing Belt Unit at process speed
of 280 mm/sec.
Use case When checking the use history at the Fixing Belt Unit replacement or
error occurrence
Adj/set/operate method N/A (display only)
Caution When replacing the Fixing Belt Unit, press the Clear key at FX-BLT-U
to reset.
Display/adj/set range 0 to 4294967295
Unit Second
Related service mode COPIER> COUNTER> DRBL-1> FX-BLT-U