Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 624

COPIER> OPTION> USER
LDAP-SW Retrieval condition set for LDAP server
Lv.1 Details To set the condition to search e-mail address, etc. from LDAP server.
Use case When specifying condition to search e-mail address, etc. from LDAP
server
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 5
0: Includes the next, 1: Not include the next, 2: Equivalent to the
next, 3: Not equivalent to the next, 4: Starts with the next, 5: Finishes
with the next
Default value 4
Supplement/memo LDAP (Lightweight Directory Access Protocol): Registering LDAP
server enables to search e-mail address, etc. from LDAP server and
the result can be registered in the Address Book, etc. Registration is
available by the following: Set Destination > Register LDAP Server
FROM-OF Deletion of mail sender's address
Lv.1 Details To set whether to delete the sender's address (From) at the time of
e-mail transmission.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Retained, 1: Deleted
Default value 0
DOM-ADD Additional entry of mail destn domain
Lv.2 Details To set to automatically add the domain specified in user mode to the
sending address (To) entered at the time of e-mail transmission.
5
If specifying "xxx.com" as a domain in user mode in advance, just
entering "aaa" enables to display "aaa@xxx.com" when sending
e-mail.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not added, 1: Added
Default value 0
5-396
COPIER> OPTION> USER
SPEAKER Dis/hide to switch speaker/headphone
Lv.1 Details To set whether to display or hide "Voice Guidance from Speaker" on
the Voice Mode Setting screen in user mode.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Settings/Registration> Preferences> Accessibility> Voice Mode
Setting> Voice Guidance from Speaker
Supplement/memo "Voice Mode Setting" in user mode is displayed only when the Voice
Guidance Kit is installed.
FILE-OF File send prohibition to entered address
Lv.1 Details To set to prohibit address entry at the time of file transmission.
File transmission is not available by entering the address because of
no display of "File" on the transmission screen.
The addresses already registered in the Address Book can be used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution To restrict addresses for transmission, be sure to manually delete
them because the addresses registered in the Address Book can be
used.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
MAIL-OF Mail send prohibition to entered address
Lv.1 Details To set to prohibit address entry at the time of e-mail transmission.
E-mail transmission is not available by entering the address because
of no display of "E-Mail" on the transmission screen.
The addresses already registered in the Address Book can be used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution To restrict addresses for transmission, be sure to manually delete
them because the addresses registered in the Address Book can be
used.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0