COPIER> ADJUST> COLOR
LD-OFS-C
Color balance adj of C low dens area
Lv.2 Details
To adjust the color balance of the low density area of C.
As the greater value is set, the image gets darker.
This setting is linked with Adjustment/Maintenance> Adjust Image
Quality> Color Balance.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
Related user mode
Adjustment/Maintenance> Adjust Image Quality> Color Balance
LD-OFS-K
Color balance adj of Bk low dens area
Lv.2 Details
To adjust the color balance of the low density area of Bk.
As the greater value is set, the image gets darker.
This setting is linked with Adjustment/Maintenance> Adjust Image
Quality> Color Balance.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
Related user mode
Adjustment/Maintenance> Adjust Image Quality> Color Balance
MD-OFS-Y
Color balance adj of Y mid dens area
Lv.2 Details
To adjust the color balance of the intermediate density area of Y.
As the greater value is set, the image gets darker.
5
This setting is linked with Adjustment/Maintenance> Adjust Image
Quality> Color Balance.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
Related user mode
Adjustment/Maintenance> Adjust Image Quality> Color Balance
5-216
COPIER> ADJUST> COLOR
MD-OFS-M
Color balance adj of M mid dens area
Lv.2 Details
To adjust the color balance of the intermediate density area of M.
As the greater value is set, the image gets darker.
This setting is linked with Adjustment/Maintenance> Adjust Image
Quality> Color Balance.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
Related user mode
Adjustment/Maintenance> Adjust Image Quality> Color Balance
MD-OFS-C
Color balance adj of C mid dens area
Lv.2 Details
To adjust the color balance of the intermediate density area of C.
As the greater value is set, the image gets darker.
This setting is linked with Adjustment/Maintenance> Adjust Image
Quality> Color Balance.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
Related user mode
Adjustment/Maintenance> Adjust Image Quality> Color Balance
MD-OFS-K
Color balance adj of Bk mid dens area
Lv.2 Details
To adjust the color balance of the intermediate density area of Bk.
As the greater value is set, the image gets darker.
This setting is linked with Adjustment/Maintenance> Adjust Image
Quality> Color Balance.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
Related user mode
Adjustment/Maintenance> Adjust Image Quality> Color Balance