Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 121

E Detailed Occurance Items
code code area
E593 -8002 -05 Title A. Error in the punch slide motor (Finisher-A1)
B. Horizontal registration home position error (External 2
Hole Puncher)
Description A. The horizontal registration HP sensor does not detect
of detection the punch unit when the punch slide motor has been
driven for 3.3 seconds.
B. At time of horizontal registration motor initialization,
the punch slide unit does not return to the horizontal
registration home position sensor even when the unit
has been driven for 37 mm.
Measures A:
B:
E5A3 -0001 -05 Title Error in the registration motor (Finisher-A1)
Description The registration HP sensor does not turn ON when the
of detection registration motor has been driven for 2.933 seconds.
Measures 1. The connector of the registration HP sensor (S105) or
the registration motor (M102) are disconnected.
2. The wiring of the registration HP sensor/the registration
motor are faulty.
3. The registration HP sensor is faulty.
4. The registration motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
Description
A-1. The connector of the horizontal registration HP
sensor (S101) or the punch slide motor (M101)
are disconnected.
A-2. The wiring of the horizontal registration HP
sensor or the punch slide motor are faulty.
A-3. The horizontal registration HP sensor is faulty.
A-4. The punch slide motor is faulty.
A-5. The puncher driver PCB (PCB1) is faulty.
A-6. The finisher controller PCB is faulty.
B-1. The horizontal registration home position (PI61)
is faulty.
B-2. The wiring between the punch controller PCB
and sensor is faulty.
B-3. The horizontal registration mechanism is faulty.
B-4. The horizontal registration motor (M62) is
faulty.
B-5. The punch controller PCB is faulty.
B-6. The finisher controller PCB is faulty.
E Detailed Occurance Items
code code area
E5A3 -0002 -05 Title Error in the registration motor (Finisher-A1)
Description The registration HP sensor does not turn OFF when the
of detection registration motor has been driven for 0.67 msecond.
Measures 1. The connector of the registration HP sensor (S105) or
the registration motor (M102) are disconnected.
2. The wiring of the registration HP sensor/the registration
motor are faulty.
3. The registration HP sensor is faulty.
4. The registration motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
E5A4 -8001 -05 Title Error in the press motor (Finisher-A1)
Description The press motor HP sensor does not turn ON when the
of detection press motor has been driven for 0.926 second.
Measures 1. The connector of the press motor HP sensor (S106) or
the press motor (M105) are disconnected.
2. The wiring of the press motor HP sensor/the press
motor are faulty.
3. The press motor HP sensor is faulty.
4. The press motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
E5A4 -8002 -05 Title Error in the press motor (Finisher-A1)
Description The press motor HP sensor does not turn OFF.
of detection
Measures 1. The connector of the press motor HP sensor (S106) or
the press motor (M105) are disconnected.
2. The wiring of the press motor HP sensor/the press
motor are faulty.
3. The press motor HP sensor is faulty.
4. The press motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
E5AA -8001 -05 Title Error in the cutter motor (Finisher-A1)
Description The home position of the trimming blade is not detected
of detection when the cutter motor has been driven for 5 sec.
Measures 1. The connector of the cutter motor clock sensor (S108)
or the cutter motor (M106) are disconnected.
2. The wiring of the cutter motor clock sensor/the cutter
motor are faulty.
3. The cutter motor clock sensor is faulty.
4. The cutter motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
Description
3
3-95