Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 163

E Detailed Occurance Items
code code area
E602 -2001 -00 Title Mismatch in use of encryption board
Description in tha case that authenticated encryption board is
of detection installed although the main unit does not have the
authentication information for the encryption board.
Measures With SST, execute the key clear for the encryption
board (HDD will be non-formatted. HDD format and re-
installation of system firmware will be required.)
E602 -2002 -00 Title Failure of the encryption board, others
Description Failure of the encryption board, others
of detection
Measures 1. Contact failure between the encryption board and main
controller board (Power cycle (Power OFF/ON))
2. With SST, execute the key clear for the encryption
board (HDD will be non-formatted. HDD format and re-
installation of system firmware will be required.)
3. After encryption board replacement, HDD format and
SYSTEM re-installation using SST
4. Replace the main controller board
E602 -4000 -00 Title OS startup error
Description Cannot mount the OS
of detection
Measures 1. Failure of cable connection
2. After HDD full-format, re-installation of system software
3. HDD is faulty
E602 -4001 -00 Title OS startup error
Description No OS startup script
of detection
Measures 1. Failure of cable connection
2. After HDD full-format, re-installation of system software
3. HDD is faulty
E602 -FF00 -00 Title Hard disk failure
Description Abnormality of unidentified partition
of detection
Measures 1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
3. If still not recovery, replace HDD and re-install system
based on judging HDD failure.
Description E Detailed Occurance Items
code code area
E602 -FF01 -00 Title Hard disk failure
Description Abnormality of unidentified partition
of detection
Measures 1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
3. If still not recovery, replace HDD and re-install system
E602 -FF02 -00 Title Hard disk failure
Description Abnormality of unidentified partition
of detection
Measures 1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
3. If still not recovery, replace HDD and re-install system
E602 -FF03 -00 Title Hard disk failure
Description Abnormality of unidentified partition
of detection
Measures 1. Execute HDD-CHECK (requires some dozens of
2. If not recovery, execute HDD-CLEAR with CHK-
E602 -FF04 -00 Title Hard disk failure
Description Abnormality of unidentified partition
of detection
Measures 1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
3. If still not recovery, replace HDD and re-install system
E602 -FF05 -00 Title Hard disk failure
Description Abnormality of unidentified partition
of detection
Measures Be usually the errors that do not make.
1. execute HDD-CLEAR with CHK-TYPE=1, 2 ,3, 5; and
2. If not recovery, replace HDD and re-install system
Description
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
based on judging HDD failure.
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
based on judging HDD failure.
minutes) with CHK-TYPE=0; and then power cycle
TYPE=1, 2, 3, 5, and then power cycle.
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
based on judging HDD failure.
then power cycle
based on judging HDD failure.
3
3-137