Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 329

COPIER> DISPLAY> HT-C
DLT-C-M3 ARCDAT scrn C M-density differ (1/3 SPD)
Lv.2 Details To display the difference between the M-patch target value and the
current value of screen C in ARCDAT control at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor and replace the
developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
DLT-C-C3 ARCDAT scrn C C-density differ (1/3 SPD)
Lv.2 Details To display the difference between the C-patch target value and the
current value of screen C in ARCDAT control at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor and replace the
developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
DLT-C-K3 ARCDAT scrn C Bk-density differ(1/3 SPD)
Lv.2 Details To display the difference between the Bk-patch target value and the
current value of screen C in ARCDAT control at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor and replace the
developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
COPIER> DISPLAY> HT-C
SGL-A-Y3 ARCDAT scrnA Y-patch current VL(1/3 SPD)
Lv.2 Details To display the current Y-patch value of screen A in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Default value 0
Supplement/memo Screen A: High screen ruling screen
SGL-A-M3 ARCDAT scrnA M-patch current VL(1/3 SPD)
Lv.2 Details To display the current M-patch value of screen A in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Default value 0
Supplement/memo Screen A: High screen ruling screen
SGL-A-C3 ARCDAT scrnA C-patch current VL(1/3 SPD)
Lv.2 Details To display the current C-patch value of screen A in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Default value 0
Supplement/memo Screen A: High screen ruling screen
SGL-A-K3 ARCDAT scrnA Bkpatch current VL(1/3 SPD)
Lv.2 Details To display the current Bk-patch value of screen A in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Default value 0
Supplement/memo Screen A: High screen ruling screen
5
5-101