Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 739

SORTER> ADJUST
PF-A4R31 Adj of A4R out-3-fold position(1st): PFU
Lv.1 Details To adjust the 1st fold position of A4R paper out-3-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-A4R32 Adj of A4R out-3-fold position(2nd): PFU
Lv.1 Details To adjust the 2nd fold position of A4R paper out-3-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PFLTRR31 Adj of LTRR out-3-fold pstn (1st): PFU
Lv.1 Details To adjust the 1st fold position of LTRR paper out-3-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
SORTER> ADJUST
PFLTRR32 Adj of LTRR out-3-fold pstn (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of LTRR paper out-3-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-A4R41 Adj of A4R 4-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of A4R paper 4-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -75 to 30
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-A4R42 Adj of A4R 4-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of A4R paper 4-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
5
5-511