Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 592

COPIER> OPTION> FEED-SW
DK2-AIR ON/OFF of Multi Deck (Upper) air assist
Lv.1 Details To set ON/OFF of the POD Deck (Upper) air assist.
In the initial settings, the air assist is OFF for plain paper or heavy
paper, and ON for coated paper, texture paper, heavy paper 2 to 5,
OHT, etc.
When a jam or double feed error frequently occurs with plain paper,
etc., set the value to 1. When the transfer performance is low with
coated paper, texture paper, etc., set the value to 2.
Use case • When a jam or double feed error frequently occurs with plain
paper or heavy paper 1
• When the transfer performance is low with coated paper, texture
paper, etc.
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 2
0: Initial setting, 1: ON, 2: OFF
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-AIR, DK3-AIR, DK4-AIR
DK3-AIR ON/OFF of Multi Deck (Middle) air assist
Lv.1 Details To set ON/OFF of the POD Deck (Middle) air assist.
In the initial settings, the air assist is OFF for plain paper or heavy
paper, and ON for coated paper, texture paper, heavy paper 2 to 5,
OHT, etc.
When a jam or double feed error frequently occurs with plain paper,
etc., set the value to 1. When the transfer performance is low with
coated paper, texture paper, etc., set the value to 2.
Use case • When a jam or double feed error frequently occurs with plain
paper or heavy paper 1
5
• When the transfer performance is low with coated paper, texture
paper, etc.
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 2
0: Initial setting, 1: ON, 2: OFF
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-AIR, DK2-AIR, DK4-AIR
5-364
COPIER> OPTION> FEED-SW
DK4-AIR ON/OFF of Multi Deck (Lower) air assist
Lv.1 Details To set ON/OFF of the POD Deck (Lower) air assist.
In the initial settings, the air assist is OFF for plain paper or heavy
paper, and ON for coated paper, texture paper, heavy paper 2 to 5,
OHT, etc.
When a jam or double feed error frequently occurs with plain paper,
etc., set the value to 1. When the transfer performance is low with
coated paper, texture paper, etc., set the value to 2.
Use case • When a jam or double feed error frequently occurs with plain
paper or heavy paper 1
• When the transfer performance is low with coated paper, texture
paper, etc.
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 2
0: Initial setting, 1: ON, 2: OFF
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-AIR, DK2-AIR, DK3-AIR
TFL-RTC Set delvry dest at rcvry after tray full
Lv.1 Details To select the delivery destination for a job with multiple pages after
recovering the Delivery Tray that reaches the full level.
When 0 (default) is set, a job is output from the delivery destination
again from which the last job was delivered.
When 1 is set, a job is output from the delivery destination which
priority is set as high at "Output Tray Settings" in user mode.
Use case When changing the delivery tray
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Output from the tray from which the last job was output.
1: Output from the delivery destination which priority is high among
the delivery trays.
Default value 0
Related user mode Function Settings> Common> Paper Output Settings> Output Tray
Settings
D-MXDSZ Prdctvty prrty mod in media mix: 2-sided
Lv.1 Details At a 2-sided job in media mixed situation, productivity is reduced
because paper circulation inside of the machine is stopped.
When 1 (productivity priority mode) is set, productivity improves
because paper circulation is not stopped.
Use case Upon user's request (Improving productivity in media mixed situation)
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 1
0: Normal mode, 1: Productivity priority mode
Default value 0