Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 622

COPIER> OPTION> USER
PRNT-POS ON/OFF of all pauses at error job cancel
Lv.2 Details To set whether to pause the print operation of following jobs when
a job is cancelled due to an error inside the machine (#037, etc.)
except service calls during PDL print.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
AFN-PSWD Access limit setting to user mode
Lv.2 Details To set to restrict password entry when accessing to the user mode.
With this setting is enabled, password entry of system administrator
is required after pressing Settings/Registration key.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Password is not required, 1: Password is required
Default value 0
PTJAM-RC Auto reprint setting at PDL print jam
Lv.2 Details To set to automatically restart printing after jam recovery that occurs
with PDL print.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
5
0: Not automatically reprinted, 1: Automatically reprinted
Default value 1
PDL-NCSW Card mngm setting for PDL print job
Lv.2 Details To set to make PDL print job to be subject to card management by
the Card Reader.
With the setting to enable this mode, PDL print is available only
when the card ID of the card inserted to the Card Reader matches
the department ID.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: PDL print is available with no card inserted.
1: PDL print is available only when the card ID matches the
department ID when the card is inserted.
Default value 0
5-394
COPIER> OPTION> USER
SLP-SLCT Usage setting of network applications
Lv.2 Details With the setting to use network-related application, the machine can
be recovered through network because it does not move to sleep
mode 1.
For this machine to recover from sleep mode 1 through network,
a particular packet needs to be received; however, the existing
network-related application does not send this packet.
With the setting not to use the network-related application, this
machine cannot recover from sleep mode 1 through network when it
gets into sleep mode 1.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this at the normal service.
Display/adj/set range 0 to 1
0: Not used (Shift to sleep mode 1 is available.)
1: Used (Shift to sleep mode 1 is not available.)
Default value 0
Supplement/memo Network-related application: NetSpot Accountant, imageWARE
PS-MODE Compatible mode setting at PS usage
Lv.2 Details To set for compatibility with existing machine regarding image
process or print specification with PS print.
Selecting 1 enables to have the print result equivalent to that of
iR2200/2800/3300 series while selecting 2 enables to have the print
result equivalent to that of iR105 series.
Use case At replacement
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
0: No use of compatibility mode with PS
1: Image processing equivalent to that of iR2200/2800/3300 series
(compatibility with existing machine)
2: Image processing equivalent to that of iR105 (compatibility with
existing machine)
3: Spare
4: 2-sided print with landscape and portrait mixed when using Canon-
made controller (compatibility with non-Canon-made controller)
5 to 65535: Spare