Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 637

COPIER> OPTION> ACC
CARD-SW Screen set when Coin Manager connected
Lv.1 Details To set coin or card that the user is urged to insert on the Control
Panel when the Coin Manager is connected.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Coin, 1: Card, 2: Coin and card, 3: Card (for customization)
Default value 0
STPL-LMT Set Number of sheets for saddle stitch
Lv.2 Details To set the number of sheets for saddle stitch
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: 5 sheets without white band (6 sheets when a cover is included)
1: 10 sheets without white band (11 sheets when a cover is included)
2: 10 sheets with white band (11 sheets when a cover is included)
3: 15 sheets with white band (16 sheets when a cover is included)
Default value 3
SC-TYPE Set of Coin Manager support machine
Lv.2 Details To set the machine that supports the Coin Manager.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this setting for the machines other than the ones that
support the Coin Manager.
Display/adj/set range 0 to 1
0: Machine installed in convenience stores, 1: Self-operated copy
machine
Default value 0
COPIER> OPTION> ACC
CC-SPSW Support setting of control card I/F
Lv.2 Details To set support level for control card (CCIV/CCV) interface.
To keep processing performance of printer engine, select "1: Priority
on speed".
To correctly stop the output by the upper limit number of sheets,
select "2: Priority on upper limit number of sheets".
Use case Upon user's request (when connecting to the external counter
management system using the control card interface)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution With priority on speed, output cannot be correctly stopped by the
upper limit number of sheets.
With priority on the upper limit number of sheets, processing
performance of the printer engine is decreased depending on pickup
location.
Display/adj/set range 0 to 2
0: No support, 1: Priority on speed, 2: Priority on upper limit number
of sheets
Default value 0
USB-MSK Limit for USB host using cannel
Lv.1 Details To set the channel that cannot use the USB host.
Use case Upon user's request
Adj/set/operate method 0 to 2
0: Not limited, 1: CH 1, 2: Not used
Display/adj/set range 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Default value 0
UNIT-PRC Setting of Coin Manager currency unit
Lv.2 Details To set currency unit to be handled with Coin Manager
Use case At installation of Coin Manager
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 6
0: Japanese yen, 1: Euro, 2: Pound, 3: Swiss Franc. 4: Dollar, 5: No
currency unit (no fractional unit), 6: No currency unit (with fractional
unit)
Default value 0
5
5-409