Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 291

COPIER> DISPLAY> HV-STS
PRIACV-Y Discharge current ctrl setting voltg (Y)
Lv.2 Details To display the AC voltage setting value to be Applied to the Y
Charging Roller At 1/1 speed derived from the latest discharge
current control.
Use case When checking the voltage value (Y) for discharge current control
Display/adj/set range 0 to 3000
Unit V
Appropriate target value 1250 to 2500
Related service mode COPIER> DISPLAY> HV-STS> PRIACV-M, PRIACV-C, PRIACI-Y,
PRIACI-M, PRIACI-C, PRISMP-Y, PRISMP-M, PRISMP-C
COPIER> FUNCTION> MISC-P> DISCHG
PRIACV-M Discharge current ctrl setting voltg (M)
Lv.2 Details To display the AC voltage setting value to be Applied to the M
Charging Roller At 1/1 speed derived from the latest discharge
current control.
Use case When checking the voltage value (M) for discharge current control
Display/adj/set range 0 to 3000
Unit V
Appropriate target value 1250 to 2500
Related service mode COPIER> DISPLAY> HV-STS> PRIACV-Y, PRIACV-C, PRIACI-Y,
PRIACI-M, PRIACI-C, PRISMP-Y, PRISMP-M, PRISMP-C
COPIER> FUNCTION> MISC-P> DISCHG
PRIACV-C Discharge current ctrl setting voltg (C)
Lv.2 Details To display the AC voltage setting value to be Applied to the C
Charging Roller At 1/1 speed derived from the latest discharge
current control.
Use case When checking the voltage value (C) for discharge current control
Display/adj/set range 0 to 3000
Unit V
Appropriate target value 1250 to 2500
Related service mode COPIER> DISPLAY> HV-STS> PRIACV-Y, PRIACV-M, PRIACI-Y,
PRIACI-M, PRIACI-C, PRISMP-Y, PRISMP-M, PRISMP-C
COPIER> FUNCTION> MISC-P> DISCHG
2ATVC-M1 Sec Trns ATVC target current:B&W,1/1 SPD
Lv.2 Details To display the decuple value of the target current At B&W 1/1 speed
derived from the latest secondary transfer Full ATVC control.
Use case When judging whether the secondary transfer is appropriately set At
image failure
Caution The correct value is not shown unless paper feed has triggered the
secondary transfer ATVC control After power-off/on.
Unit uA
Appropriate target value 60 to 90
Related service mode COPIER> ADJUST> HV-TR> 2TR-TGT1 to 8, TR-PPR1 to 8
COPIER> DISPLAY> HV-STS
2ATVC-F2 Sec Trns ATVC target current:clr,1/2 SPD
Lv.2 Details To display the decuple value of the target current At full-color 1/2
speed derived from the latest secondary transfer Full ATVC control.
Use case When judging whether the secondary transfer is appropriately set At
image failure
Caution The correct value is not shown unless paper feed has triggered the
secondary transfer ATVC control After power-off/on.
Unit uA
Appropriate target value 30 to 60
Related service mode COPIER> ADJUST> HV-TR> 2TR-TGT1 to 8, TR-PPR1 to 8
2ATVC-M2 Sec Trns ATVC target current:B&W,1/2 SPD
Lv.2 Details To display the decuple value of the target current At B&W 1/2 speed
derived from the latest secondary transfer Full ATVC control.
Use case When judging whether the secondary transfer is appropriately set At
image failure
Caution The correct value is not shown unless paper feed has triggered the
secondary transfer ATVC control After power-off/on.
Unit uA
Appropriate target value 30 to 60
Related service mode COPIER> ADJUST> HV-TR> 2TR-TGT1 to 8, TR-PPR1 to 8
2ATVC-F3 Sec Trns ATVC target current:clr,1/3 SPD
Lv.2 Details To display the decuple value of the target current At full-color 1/3
speed derived from the latest secondary transfer Full ATVC control.
Use case When judging whether the secondary transfer is appropriately set At
image failure
Caution The correct value is not shown unless paper feed has triggered the
secondary transfer ATVC control After power-off/on.
Unit uA
Appropriate target value 20 to 40
Related service mode COPIER> ADJUST> HV-TR> 2TR-TGT1 to 8, TR-PPR1 to 8
2ATVC-M3 Sec Trns ATVC target current:B&W,1/3 SPD
Lv.2 Details To display the decuple value of the target current At B&W 1/3 speed
derived from the latest secondary transfer Full ATVC control.
Use case When judging whether the secondary transfer is appropriately set At
image failure
Caution The correct value is not shown unless paper feed has triggered the
secondary transfer ATVC control After power-off/on.
Unit uA
Appropriate target value 20 to 40
Related service mode COPIER> ADJUST> HV-TR> 2TR-TGT1 to 8, TR-PPR1 to 8
5
5-63