Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 326

COPIER> DISPLAY> HT-C
SUM-A-K3 ARCDAT scrnA Bk-clr ctrl differ(1/3 SPD)
Lv.2 Details To display Bk-patch control difference of screen A in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen A: High screen ruling screen
SUM-B-Y3 ARCDAT scrnB Y-clr ctrl differ (1/3 SPD)
Lv.2 Details To display Y-patch control difference of screen B in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen B: Low screen ruling screen
SUM-B-M3 ARCDAT scrnB M-clr ctrl differ (1/3 SPD)
Lv.2 Details To display M-patch control difference of screen B in ARCDAT control
at 1/3 speed.
5
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen B: Low screen ruling screen
5-98
COPIER> DISPLAY> HT-C
SUM-B-C3 ARCDAT scrnB C-clr ctrl differ (1/3 SPD)
Lv.2 Details To display C-patch control difference of screen B in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen B: Low screen ruling screen
SUM-B-K3 ARCDAT scrnB Bk-clr ctrl differ(1/3 SPD)
Lv.2 Details To display Bk-patch control difference of screen B in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen B: Low screen ruling screen
SUM-C-Y3 ARCDAT scrnC Y-clr ctrl differ (1/3 SPD)
Lv.2 Details To display Y-patch control difference of screen C in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen