Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 512

COPIER> FUNCTION> INSTALL
INISET-K Exe of Bk Dev Ass'y initial instal mode
Lv.1 Details To automatically execute operation necessary for initial installation of
the Bk Developing Assembly.
1. Patch light intensity correction
2. Background correction
3. Potential control
4. Idle rotation of the Developing Assembly
5. Initialization of the Toner Density Sensor
6. Initialization of the Patch Sensor
7. Counter reset of the Developing Assembly
After execution, the AINR-OFF setting automatically returns to "0:
OFF".
Use case When replacing the Bk Developing Assembly
Adj/set/operate method Select the item, and then press OK key.
Caution • When installing the machine or replacing the Developing Assembly
of other color, do not use this item. .
• Execute this item after setting "AINR-OFF" to "1: ON".
Display/adj/set range During operation: xxx second (remaining time), At normal termination:
OK, At abnormal termination: NG
Required time 155 seconds
Related service mode COPIER> FUNCTION> INSTALL> INISET-Y, INISET-M, INISET-C,
INISET-4, AINR-OFF
INIT-ITB Creation of ITB edge profile
Lv.1 Details To create the initial ITB edge profile to be used for the ITB
displacement correction control.
The initial ITB edge profile is created after neutral position of the
Steering Roller is determined by the ITB displacement correction
5
control.
Use case When replacing the ITB
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When the operation finished normally: OK
Required time 3 minutes
5-284
COPIER> FUNCTION> INSTALL
BRWS-ACT ON/OFF of service browser
Lv.1 Details To set ON/OFF of service browser.
ON/OFF of service browser switches whenever the main power
switch is turned OFF/ON after execution.
If connection with the UGW server is successful, "OK!" is displayed.
If "NG!" is displayed, execute a communication test using COM-
TEST.
The setting is enabled after reboot. Whether the service browser is
ON or OFF can be checked in COPIER> DISPLAY> USER> BRWS-
STS (1: ON, 2: OFF).
Use case • When using the service browser
• At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution After execution, turn OFF/ON the main power switch. After reboot,
be sure to check the usage status in COPIER> DISPLAY> USER>
BRWS-STS.
Display/adj/set range At normal termination: OK!, At abnormal termination: NG!
Related service mode COPIER> FUNCTION> INSTALL> COM-TEST
COPIER> DISPLAY> USER> BRWS-STS
CDS-CTL Setting of country/area when CDS is used
Lv.1 Details To set the country/area to enable the CDS.
Use case When enabling the CDS
Display/adj/set range CA (Canada), LA (Latin America), HK (Hong Kong) and the country/
area specified in COPIER> OPTION> FNC-SW> CONFIG.
Default value It differs according to the location.
Related service mode COPIER> OPTION> FNC-SW> CONFIG
Supplement/memo CDS: Contents Delivery System
TD-AD-Y Setting of Y-toner density
Lv.1 Details To set toner density of the Y Developing Assembly to 10%.
Use case When replacing to a new Y Developing Assembly
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> FUNCTION> TD-AD-M, TD-AD-C, TD-AD-K, TD-AD-4C
TD-AD-M Setting of M-toner density
Lv.1 Details To set toner density of the M Developing Assembly to 10%.
Use case When replacing to a new M Developing Assembly
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> FUNCTION> TD-AD-Y, TD-AD-C, TD-AD-K, TD-AD-4C
TD-AD-C Setting of C-toner density
Lv.1 Details To set toner density of the C Developing Assembly to 10%.
Use case When replacing to a new C Developing Assembly
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> FUNCTION> TD-AD-Y, TD-AD-M, TD-AD-K, TD-AD-4C