Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 104

E Detailed Occurance Items
code code area
E514 -8002 -05 Title
Description
of detection
Measures
3
E514 -8003 -05 Title
Description
of detection
Measures
E514 -8004 -05 Title
Description
of detection
Measures
3-78
Description
A. Error in the gripper base motor (Finisher-A1)
B. Rear end assist home position error (Finisher-B1)
A. The gripper base rear sensor dose not detect the
gripper when the gripper base motor has been driven
for 3 seconds.
B. The stapler does not return to the rear end assist home
position when the rear end assist motor has been
driven for 3 seconds.
A:
A-1. The connector of the gripper base rear sensor
(S117) or the gripper base motor (M116) are
disconnected.
A-2. The wiring of the gripper base rear sensor or
the gripper base motor are faulty.
A-3. The gripper base rear sensor is faulty.
A-4. The gripper base motor is faulty.
A-5. The finisher controller PCB is faulty.
B:
B-1. The rear end assist home position sensor
(PI109) is faulty.
B-2. The wiring between the finisher controller PCB
and rear end assist motor is faulty.
B-3. The end assist mechanism is faulty.
B-4. The rear end assist motor (M109) is faulty.
B-5. The finisher controller PCB is faulty.
Error in the gripper motor (Finisher-A1)
The gripper does not come off the gripper HP sensor
when the gripper motor has been driven for 3 seconds.
1. The connector of the gripper HP sensor (S140) or the
gripper motor (M117) are disconnected.
2. The wiring of the gripper HP sensor) or the gripper
motor are faulty.
3. The gripper HP sensor is faulty.
4. The gripper motor is faulty.
5. The finisher controller PCB is faulty.
Error in the gripper motor (Finisher-A1)
The gripper HP sensor does not detect the gripper when
the gripper motor has been driven for 3 seconds.
1. The connector of the gripper HP sensor (S140) or the
gripper motor (M117) are disconnected.
2. The wiring of the gripper HP sensor or the gripper
motor are faulty.
3. The gripper HP sensor is faulty.
4. The gripper motor is faulty.
5. The finisher controller PCB is faulty.
E Detailed Occurance Items
code code area
E514 -8005 -05 Title Error in the gripper motor (Finisher-A1)
Description The gripper does not come off the position sensor when
of detection the gripper motor has been driven for 3 seconds.
Measures 1. The connector of the gripper position sensor (S115) or
the gripper motor (M117) are disconnected.
2. The wiring of the gripper position sensor or the gripper
motor are faulty.
3. The gripper position sensor is faulty.
4. The gripper motor is faulty.
5. The finisher controller PCB is faulty.
E514 -8006 -05 Title Error in the gripper motor (Finisher-A1)
Description The gripper position sensor does not detect the gripper
of detection when the gripper motor has been driven for 3 seconds.
Measures 1. The connector of the gripper position sensor (S115) or
the gripper motor (M117) are disconnected.
2. The wiring of the gripper position sensor or the gripper
motor are faulty.
3. The gripper position sensor is faulty.
4. The gripper motor is faulty.
5. The finisher controller PCB is faulty.
E518 -8001 -05 Title Error in folding feed motor lock (Document Insertion
Folding Unit/Paper Folding Unit)
Description The fold transport motor (M5/M11) lock signal has been
of detection detected for more than the specified period of time.
Measures 1. Connector of Folding feed motor (M5/M11) is
disconnected.
2. Folding feed motor is faulty.
E519 -0002 -05 Title Gear change home position error (Finisher-B1)
Description The gear change home position sensor does not turn ON
of detection when the gear change motor has been driven for 387
pulses.
Measures 1. The gear change home position sensor (PI117) is
faulty.
2. The wiring between the finisher controller PCB and
gear change motor is faulty.
3. The gear change mechanism is faulty.
4. The gear change motor (M110) is faulty.
5. The finisher controller PCB is faulty.
Description