Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 732

FEED-CHK Specifying DADF individual feed mode
Lv.1 Details To specify the feed mode for DADF.
Feed operation is activated by FEED-ON.
Use case At operation check
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 3
0: 1-sided pickup/delivery operation
1: 2-sided pickup/delivery operation
2: 1-sided pickup/delivery operation (with stamp)
3: 2-sided pickup/delivery operation (with stamp)
Related service mode FEEDER> FUNCTION> FEED-ON
FAN-CHK Specifying DADF Operation Fan
Lv.1 Details To specify the DADF Fan to operate.
The fan is activated by FAN-ON.
Use case At operation check
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 1
0: Motor Driver Cooling Fan (FM1),
1: Read Motor Cooling Fan (FM2)
Related service mode FEEDER> FUNCTION>FAN-ON
FAN-ON Operation check of DADF Fan
Lv.1 Details To start operation check for the fan specified by FAN-CHK.
Use case At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
The fan operates for approximately 5 seconds and automatically
stops.
2) Press OK key.
5
The operation check is completed.
Caution Be sure to press the OK key again after execution. The operation
automatically stops after approximately 5 seconds, but is not
completed unless the OK key is pressed (STOP is not displayed).
Required time Approx. 5 seconds
Related service mode FEEDER> FUNCTION> FAN-CHK
SL-CHK Specifying DADF Operation Solenoid
Lv.1 Details To specify the DADF solenoid to operate.
The solenoid is activated by SL-ON.
Use case At operation check
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 1
0: Disengagement Solenoid (SL1)
1: Stamp Solenoid (SL2)
Related service mode FEEDER> FUNCTION> SL-ON
5-504
FEEDER> FUNCTION FEEDER> FUNCTION
SL-ON Operation check of DADF Solenoid
Lv.1 Details To start operation check for the solenoid specified by SL-CHK.
Use case At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
The unit operates for approximately 5 seconds and automatically
stops.
2) Press OK key.
The operation check is completed.
Caution Be sure to press the OK key again after execution. The operation
automatically stops after approximately 5 seconds, but is not
completed unless the OK key is pressed (STOP is not displayed).
Required time Approx. 5 seconds
Related service mode FEEDER> FUNCTION> SL-CHK
MTR-ON Operation check of motor
Lv.1 Details To start operation check for the motor specified by MTR-CHK.
Use case At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
The unit operates for approximately 5 seconds and automatically
stops.
2) Press OK key.
The operation check is completed.
Caution Be sure to press the OK key again after execution. The operation
automatically stops after approximately 5 seconds, but is not
completed unless the OK key is pressed (STOP is not displayed).
Required time Approx. 5 seconds
Related service mode FEEDER> FUNCTION> MTR-CHK
ROLL-CLN Rotation of DADF Rollers
Lv.1 Details To rotate for cleaning the DADF Rollers.
Clean the roller by putting the lint-free paper moistened with alcohol
while it is rotating.
Use case At roller cleaning
Adj/set/operate method 1) Select the item, and then press OK key.
2) Clean the rotating rollers with lint-free paper moistened with
alcohol.
3) Press OK key.
The rollers stop.
FEED-ON Operation check of DADF individual feed
Lv.1 Details To start operation check for the feed mode specified by FEED-CHK.
Use case At operation check
Adj/set/operate method Select the item, and then press OK key.
Related service mode FEEDER> FUNCTION> FEED-CHK
T-5-95