Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 286

■ USER
COPIER> DISPLAY> USER
SPDTYPE Dis of Ctrollr Board engine speed type
Lv.1 Details To display the engine speed type (ppm) of Controller Board.
Use case When checking the engine speed type of Controller Board
Display/adj/set range 55 to 75
BRWS-STS Display of service browser ON/OFF
Lv.1 Details To display whether the service browser can be used.
If the value is 1, [Service Browser] button is displayed on the service
mode initial screen.
The value of BRWS-STS switches whenever COPIER> FUNCTION>
INSTALL> BRWS-ACT is executed, but ON/OFF of service browser
is enabled after reboot. If the service browser does not start even
though the value of BRWS-STS is 1, turn OFF/ON the main power
switch.
Use case When checking the operation mode of the service browser
Caution The value of BRWS-STS is linked with COPIER> FUNCTION>
INSTALL> BRWS-ACT, but the service browser cannot start even
though 1 is displayed unless the main power switch is turned OFF/
ON.
Display/adj/set range 1 to 2
1: ON (Available), 2: OFF (Not available)
Related service mode COPIER> FUCNTION> INSTALL> BRWS-ACT
5
5-58
■ ACC-STS
FEEDER
Lv.1 Details
Use case
Display/adj/set range
SORTER
Lv.1 Details
Use case
Display/adj/set range
DECK
Lv.1 Details
Use case
Display/adj/set range
T-5-2
CARD
Lv.1 Details
Use case
Display/adj/set range
RAM
Lv.1 Details
Use case
Unit
Default value
COPIER> DISPLAY> ACC-STS
Display of DADF connection state
To display the connecting state of DADF.
When checking the connection between the machine and DADF
0 to 1
0: Not connected, 1: Connected
Connect state of Finisher-related option
To display the connecting state of Finisher-related options.
When checking the connection of Finisher-related options
Left column (connecting state of Finisher-related options): 1 to 5
1: Without Saddle
2: With Saddle, without Folding Unit
3: With Saddle and Inserter, without Folding Unit
4: With Saddle and Folding Unit, without Inserter
5: With Saddle, Inserter and Folding Unit
Right column (connecting state of Finisher-belonged Inserter): 0 to 4
0: no hole, 1: 2-hole, 2: 2/3-hole, 3: 4-hole, 4: 4-hole (SW)
Dis of Paper Deck connection state
To display the connecting state of the Paper Deck.
When checking the connection between the machine and the Paper
Decks
0 to 8
0: Not connected
1: Connected (small) (Display is hidden on this machine.)
2: Connected (large)
3: POD Deck Lite (with Multi-purpose Tray)
4: POD Deck Lite (without Multi-purpose Tray )
5: Multi-purpose Tray only
6: POD deck
7: 2-POD deck connected
8: 3-POD deck connected (Display is hidden on this machine.)
Dis of connection state of Card Reader
To display the connecting state of Card Reader.
When checking the connection between the machine and the Card
Reader
0 to 1
0: No card is inserted while the Card Reader is connected. (Copy is
not available.)
1: Card Reader is not connected, or card is inserted while the Card
Reader is connected. (Copy is available.)
Display of MNCON PCB memory capacity
To display the memory capacity of the Main Controller PCB.
When checking the memory capacity of the machine
MB
512