Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 129

E Detailed Occurance Items
code code area
E5F6 -8002 -05 Title A. Error in the saddle paper push-on plate motor
(Finisher-A1)
B. Paper pushing plate home position error (Finisher-B1)
Description A. The saddle paper push-on plate does not come off
of detection the saddle paper push-on plate HP sensor when the
saddle paper push-on plate motor has been driven for
0.15 second.
B. The paper pushing plate home position sensor does
not turn OFF when the paper pushing plate motor has
been driven for 150 msecond.
Measures A:
B:
Description
A-1. The connector of the saddle paper push-
on plate HP sensor (S218) or the saddle paper
push-on plate motor (M205) are disconnected.
A-2. The wiring of the saddle paper push-on plate
HP sensor/the saddle paper push-on plate motor
are faulty.
A-3. The saddle paper push-on plate HP sensor is
faulty.
A-4. The saddle paper push-on plate motor is faulty.
A-5. The saddle stitcher controller PCB is faulty.
A-6. The finisher controller PCB is faulty.
B-1. The paper pushing plate home position sensor
(PI14), paper pushing plate top position sensor
(PI15), and paper pushing plate motor clock
sensor (PI1) is faulty.
B-2. The paper pushing plate drive mechanism is
faulty.
B-3. The paper pushing plate motor (M8)
B-4. The saddle stitcher controller PCB is faulty.
E Detailed Occurance Items
code code area
E5F6 -8003 -05 Title A. Saddle paper push-on plate motor clock error
(Finisher-A1)
B. Paper pushing plate motor clock error (Finisher-B1)
Description A. The drive speed of the saddle paper push-on plate
of detection motor is less than 6 clocks.
B. The number of pulses detected by the paper pushing
plate motor clock sensor is 6 pulses or less.
Measures A:
B:
E5F6 -8004 -05 Title Pushing position error (Finisher-B1)
Description The paper pushing plate leading edge position sensor
of detection does not turn ON when the paper pushing plate motor
has been driven for 0.1 second.
Measures 1. The paper pushing plate home position sensor (PI14)/
paper pushing plate top position sensor (PI15)/paper
pushing plate motor clock sensor (PI1) are faulty.
2. The paper pushing plate drive mechanism is faulty.
3. The paper pushing plate motor (M8) is faulty.
4. The saddle stitcher controller PCB is faulty.
Description
A-1. The connector of the saddle paper push-on
plate motor sensor (S213) or the saddle paper
push-on plate motor (M205) are disconnected.
A-2. The wiring of the saddle paper push-on plate
motor sensor/the saddle paper push-on plate
motor are faulty.
A-3. The saddle paper push-on plate motor sensor
is faulty.
A-4. The saddle paper push-on plate motor is faulty.
A-5. The saddle stitcher controller PCB is faulty.
A-6. The finisher controller PCB is faulty.
B-1. The paper pushing plate home position sensor
(PI14), paper pushing plate top position sensor
(PI15), and paper pushing plate motor clock
sensor (PI1) is faulty.
B-2. The paper pushing plate drive mechanism is
faulty.
B-3. The paper pushing plate motor (M8) is faulty.
B-4. The saddle stitcher controller PCB is faulty.
3-103
3