Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 206

Edit Puncher Unit Die Name
■ Timer/Energy Settings
* Default Settings
Adjust Time
Date/Time Settings
Time Format
Auto Reset Time
Function After Auto Reset
Auto Sleep Time
Sleep Mode Energy Use
Weekly Timer Settings
4
Enerqv Saver/Sleep Mode Exit Time Settings
Change Energy Saver Mode
Enerqv Saver Mode Time
■ Network
If you are configuring the settings for the first time in "Interface Settings," "TCP/IPv4 Settings," "TCP/IPv6 Settings," or "Settings Common to TCP/IPv4 and TCP/IPv6," use the control panel of the
machine. After configuring the TCP/IP settings, you can change them using the Remote UI.
In the NetWare or AppleTalk network, the TCP/IP protocol must be used to specify the settings with software other than the control panel of the machine. The setting items are shown below.
• Some items can be set using the Remote UI. Use the control panel of the device to set items which cannot be set using the Remote UI.
* Default Settings
*1 Indicates items that appear only when the appropriate optional equipment is attached.
User Data List
Confirm Network Connection Set. Changes
TCP/IP Settings
IPv4 Settings
Use IPv4
4-4
Item
Item
Item
Setting Description
Installed Punch Die Name, Edit
Setting Description
00: 00 to 23: 59, in one minute increments (00: 00*)
Date and Time Setting (12 digit number)
Time Zone: GMT -12: 00 to GMT +12: 00 (GMT
-05:00*)
Daylight Saving Time: On, Off*
24 Hour, 12 Hour*
0 (Off) to 9 minutes, in one minute increments
(2minutes*)
Initial Function*, Selected Function
5, 10, 15*, 20, 30, 40, 50 min., 1 hour, 90 min.,
2, 3, 4 hours
Low*, High
Sunday to Saturday, 00: 00 to 23: 59, in one minute
increments
00: 00 to 23: 59, in one minute increments
-10*,-25,-50%, None
5, 10, 15, 20, 30, 40, 50 min., 1 hour*, 90 min.,
2, 3, 4 hours
Setting Description
Plint List
On, Off*
On*, Off
Device Information
DeliveryAvailable
T-4-2
Device Information
Delivery Available
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
T-4-3
Can be set in Remote Device Information
UI Delivery Available
Yes No
No Yes
Yes No