Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 317

COPIER> DISPLAY> HT-C
DLTA-C-M Dis of ARCDAT screen C M-density differ
Lv.2 Details To display the difference between the M-patch target value and the
current value of screen C in ARCDAT control.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset the target
value). Check the Patch Sensor or replace the developer if not
corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
DLTA-C-C Dis of ARCDAT screen C C-density differ
Lv.2 Details To display the difference between the C-patch target value and the
current value of screen C in ARCDAT control.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset the target
value). Check the Patch Sensor or replace the developer if not
corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
DLTA-C-K Dis of ARCDAT screen C Bk-density differ
Lv.2 Details To display the difference between the Bk-patch target value and the
current value of screen C in ARCDAT control.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset the target
value). Check the Patch Sensor or replace the developer if not
corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
COPIER> DISPLAY> HT-C
TGT-A-Y2 ARCDAT scrn A Y-clr target VL (1/2 SPD)
Lv.2 Details To display the Y-patch target value of screen A in ARCDAT control at
1/2 speed.
Use case When checking ARCDAT control operation
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Supplement/memo Screen A: High screen ruling screen
TGT-A-M2 ARCDAT scrn A M-clr target VL (1/2 SPD)
Lv.2 Details To display the M-patch target value of screen A in ARCDAT control at
1/2 speed.
Use case When checking ARCDAT control operation
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Supplement/memo Screen A: High screen ruling screen
TGT-A-C2 ARCDAT scrn A C-clr target VL (1/2 SPD)
Lv.2 Details To display the C-patch target value of screen A in ARCDAT control at
1/2 speed.
Use case When checking ARCDAT control operation
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Supplement/memo Screen A: High screen ruling screen
TGT-A-K2 ARCDAT scrn A Bk-clr target VL (1/2 SPD)
Lv.2 Details To display the Bk-patch target value of screen A in ARCDAT control
at 1/2 speed.
Use case When checking ARCDAT control operation
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Supplement/memo Screen A: High screen ruling screen
TGT-A-Y3 ARCDAT scrn A Y-color target VL(1/3 SPD)
Lv.2 Details To display the Y-patch target value of screen A in ARCDAT control at
1/3 speed.
Use case When checking ARCDAT control operation
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Supplement/memo Screen A: High screen ruling screen
5
5-89