Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 571

COPIER> OPTION> IMG-FIX
EDG-WAIT Edge heat stby set: thin/pln1,2/rcycl1,2
Lv.2 Details To set ON/OFF of job standby in the case of temperature rise at the
edge of "Thin, Plain 1, Plain 2, Recycled 1 and Recycled 2," and
adjust the job acceptance judgment temperature when ON is set.
Use "0: OFF" in the normal operation.
When hot offset due to temperature rise at the paper edge occurs,
set 1 to 3 (ON). As the value is incremented by 1, the job acceptance
judgment temperature is decreased by 5 deg C.
Use case When hot offset occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When ON is set, job standby occurs after small size sheets are
continuously fed.
Display/adj/set range 0 to 3
0: OFF
1: ON (Job acceptance judgment temperature: Initial value)
2: ON (Job acceptance judgment temperature: Initial value - 5 deg C)
3: ON (Job acceptance judgment temperature: Initial value - 10 deg
C)
Default value 0
FX-FAN1 Adj of Press Belt Cooling Fan ON temp
Lv.2 Details To adjust the temperature condition (center and edge) which the
Pressure Belt Cooling Fan is turned ON during/after a job.
Use "0: Initial value" in the normal operation.
Use case When changing the temperature condition to which the Pressure Belt
Cooling Fan is turned ON
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -1 to 4
-1: -10 deg C, 0: 0 deg C, 1: +10 deg C, 2: +20 deg C, 3: +30 deg C, 4:
+40 deg C
Unit 10 deg C
Default value 0
FX-FAN2 Adj of Press Belt Cooling Fan OFF temp
Lv.2 Details To adjust the temperature condition (edge) which the Pressure Belt
Cooling Fan is turned OFF during/after a job.
Use "0: Initial value" in the normal operation.
Use case When changing the temperature condition to which the Pressure Belt
Cooling Fan is turned OFF
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -2 to 2
-2: -20 deg C, -1: -10 deg C, 0: 0 deg C, 1: +10 deg C, 2: +20 deg C
Unit 10 deg C
Default value 0
COPIER> OPTION> IMG-FIX
NIP-DWN Adj of pressure amount: Coated paper
Lv.2 Details To adjust the pressure amount of the Pressure Belt when feeding
"Coated Paper."
Use 0 (initial value) in the normal operation.
As the value is smaller, the pressure amount is decreased.
Use case When wrinkles or rain-like spots occur
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -3 to 2
-3: 892 pulses, -2: 792 pulses, -1: 692 pulses, 0: 592 pulses, 1: 492
pulses, 2: 392 pulses
Unit 100 pulses
Default value 0
NIP-DWN2 Adj of pressure amount: heavy paper 1, 2
Lv.2 Details To adjust the pressure amount of the Pressure Belt when feeding
"Heavy 1, 2."
Use 3 (initial value) in the normal operation.
As the value is smaller, the pressure amount is decreased.
Use case When paper edge scratches the Pressure Belt
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Fixing at the paper edge might be deteriorated.
Display/adj/set range -3 to 3
-3: 892 pulses, -2: 792 pulses, -1: 692 pulses, 0: 592 pulses, 1: 492
pulses, 2: 392 pulses, 3: 0 pulse
Unit 100 pulses
Default value 0
NIP-DWN3 Adj of pressure amount: heavy paper 3, 4
Lv.2 Details To adjust the pressure amount of the Pressure Belt when feeding
"Heavy 3, 4."
Use 3: Initial value in the normal operation.
As the value is smaller, the pressure amount is lowered.
Use case When paper edge scratches the Pressure Belt
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Fixing at the edge might be deteriorated.
Display/adj/set range -3 to 3
-3: 892 pulses, -2: 792 pulses, -1: 692 pulses, 0: 592 pulses, 1: 492
pulses, 2: 392 pulses, 3: 0 pulse
Unit 100 pulses
Default value 0
5
5-343