Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 130

E Detailed Occurance Items
code code area
E5F6 -8005 -05 Title
Description
of detection
Measures
E5F7 -8001 -05 Title
Description
of detection
Measures
3
E5F7 -8002 -05 Title
Description
of detection
Measures
3-104
Description
Pushing position error (Finisher-B1)
The paper pushing plate leading edge position sensor
does not turn OFF when the paper pushing plate motor
has been driven for 0.5 second.
1. The paper pushing plate home position sensor (PI14)/
paper pushing plate top position sensor (PI15)/paper
pushing plate motor clock sensor (PI1) are faulty.
2. The paper pushing plate drive mechanism is faulty.
3. The paper pushing plate motor (M8) is faulty.
4. The saddle stitcher controller PCB is faulty.
Error in the saddle trailing edge retainer motor
(Finisher-A1)
The saddle trailing edge retainer HP sensor does not
detect the saddle trailing edge retainer when the saddle
trailing edge retainer motor has been driven for 80 pulses.
1. The connector of the saddle trailing edge retainer
HP sensor (S221) or the saddle trailing edge retainer
motor (M210) are disconnected.
2. The wiring of the saddle trailing edge retainer HP
sensor/the saddle trailing edge retainer motor are
faulty.
3. The saddle trailing edge retainer HP sensor is faulty.
4. The saddle trailing edge retainer motor is faulty.
5. The saddle stitcher controller PCB is faulty.
6. The finisher controller PCB is faulty.
Error in the saddle trailing edge retainer motor
(Finisher-A1)
The saddle trailing edge retainer does not come off the
saddle trailing edge retainer HP sensor when the saddle
trailing edge retainer motor has been driven for 50 pulses.
1. The connector of the saddle trailing edge retainer
HP sensor (S221) or the saddle trailing edge retainer
motor (M210) are disconnected.
2. The wiring of the saddle trailing edge retainer HP
sensor/the saddle trailing edge retainer motor are
faulty.
3. The saddle trailing edge retainer HP sensor is faulty.
4. The saddle trailing edge retainer motor is faulty.
5. The saddle stitcher controller PCB is faulty.
6. The finisher controller PCB is faulty.
E Detailed Occurance Items
code code area
E5F8 -8001 -05 Title Error in the saddle tapping motor (Finisher-A1)
Description The saddle paper tapping HP sensor does not detect the
of detection saddle tapping plate when the saddle tapping motor has
been driven for 50 pulses.
Measures 1. The connector of the saddle paper tapping HP sensor
(S215) or the saddle tapping motor (M213) are
disconnected.
2. The wiring of the saddle paper tapping HP sensor/the
saddle tapping motor are faulty.
3. The saddle paper tapping HP sensor is faulty.
4. The saddle tapping motor is faulty.
5. The saddle stitcher controller PCB is faulty.
6. The finisher controller PCB is faulty.
E5F8 -8002 -05 Title Error in the saddle tapping motor (Finisher-A1)
Description The saddle tapping plate does not come off the saddle
of detection paper tapping HP sensor when the saddle tapping motor
has been driven for 50 pulses.
Measures 1. The connector of the saddle paper tapping HP sensor
(S215) or the saddle tapping motor (M213) are
disconnected.
2. The wiring of the saddle paper tapping HP sensor/the
saddle tapping motor are faulty.
3. The saddle paper tapping HP sensor is faulty.
4. The saddle tapping motor is faulty.
5. The saddle stitcher controller PCB is faulty.
6. The finisher controller PCB is faulty.
E5F9 -8001 -05 Title Error in the saddle lead-in roller disengage motor
(Finisher-A1)
Description The saddle lead-in roller HP sensor does not detect
of detection the saddle lead-in roller when the saddle lead-in roller
disengage motor has been driven for 50 pulses.
Measures 1. The connector of the saddle lead-in roller HP sensor
(S222) or the saddle lead-in roller disengage motor
(M214) are disconnected.
2. The wiring of the saddle lead-in roller HP sensor/the
saddle lead-in roller disengage motor are faulty.
3. The saddle lead-in roller HP sensor is faulty.
4. The saddle lead-in roller disengage motor is faulty.
5. The saddle stitcher controller PCB is faulty.
6. The finisher controller PCB is faulty.
Description