Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 162

E Detailed Occurance Items
code code area
E602 -1613 -00 Title
Description
of detection
Measures
E602 -1614 -00 Title
Description
of detection
Measures
3
E602 -1621 -00 Title
Description
of detection
Measures
E602 -1622 -00 Title
Description
of detection
Measures
3-136
Description
Hard disk failure
/APL_CDS is abnormal
It is very likely that document data such as Inbox on the
HDD are damaged.
1. Input applicable CHK-TYPE into a partition; and
execute HDD-CHECK (requires several minutes to
some dozens of minutes); and then power cycle
2. If not recovery, input applicable CHK-TYPE into a
partition; and execute HDD-CLEAR; and then power
cycle
(in the case of BOOTDEV, BOOTDEV2, APL_SEND,
execute re-format / reinstallation with SST)
3. If still not recovery, replace HDD and re-install system
based on judging HDD failure.
Hard disk failure
/APL_CDS is abnormal
This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
2. If not recovery, replace HDD and re-install system
based on judging HDD failure.
Hard disk failure
/APL_CDS is abnormal
This is an error that usually does not occur at Read/Write
level.
1. Check a cable or power supply connector
2. If not recovery, replace HDD and re-install system
based on judging HDD failure.
Hard disk failure
/APL_CDS is abnormal
This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
2. If not recovery, replace HDD and re-install system
based on judging HDD failure.
E Detailed Occurance Items
code code area
E602 -1623 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
2. If not recovery, replace HDD and re-install system
E602 -1624 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
2. If not recovery, replace HDD and re-install system
E602 -1625 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures It is very likely that document data such as Inbox on the
HDD are damaged.
1. Input applicable CHK-TYPE into a partition; and
2. If not recovery, input applicable CHK-TYPE into a
3. If still not recovery, replace HDD and re-install system
E602 -2000 -00 Title Authentication error with main unit and the encryption
board
Description Authentication error with main unit and the encryption
of detection board
Measures 1. Contact failure between the encryption board and main
2. With SST, execute the key clear for the encryption
Description
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
based on judging HDD failure.
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
based on judging HDD failure.
execute HDD-CHECK (requires several minutes to
some dozens of minutes); and then power cycle
partition; and execute HDD-CLEAR; and then power
cycle
(in the case of BOOTDEV, BOOTDEV2, APL_SEND,
execute re-format / reinstallation with SST)
based on judging HDD failure.
controller board (Power cycle (Power OFF/ON))
board (HDD will be non-formatted. HDD format and re-
installation of system firmware will be required.)