Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 459

COPIER> ADJUST> HV-TR
TR-PPR6 Sec trns indiv setting paper type: set 6
Lv.2 Details To set the paper type (paper weight) for setting 6.
Setting 6 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV6,
TR-PPR6, TR-CLR6 and TR-DUP6. When this condition is satisfied,
the target current that is set in 2TR-TGT6 and paper allotted voltage
that is set in 2TR-SHR6 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs due to the paper type occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 13
1: Plain paper (64 to 105 g/m2)
2: Recycled paper (64 to 105 g/m2)
3: Thin paper (52 to 63 g/m2)
4: Heavy paper (106 to 220 g/m2)
5: Heavy paper (221 to 300 g/m2)
6: Coated paper (106 to 220 g/m2)
7: Coated paper (221 to 300 g/m2)
8: Transparency
9: Textured paper
10, 11: Not used
12: Postcard
13: Labels
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV6, TR-CLR6, TR-DUP6, 2TR-
TGT6, 2TR-SHR6
COPIER> ADJUST> HV-TR
TR-PPR7 Sec trns indiv setting paper type: set 7
Lv.2 Details To set the paper type (paper weight) for setting 7.
Setting 7 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV7,
TR-PPR7, TR-CLR7 and TR-DUP7. When this condition is satisfied,
the target current that is set in 2TR-TGT7 and paper allotted voltage
that is set in 2TR-SHR7 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs due to the paper type occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 13
1: Plain paper (64 to 105 g/m2)
2: Recycled paper (64 to 105 g/m2)
3: Thin paper (52 to 63 g/m2)
4: Heavy paper (106 to 220 g/m2)
5: Heavy paper (221 to 300 g/m2)
6: Coated paper (106 to 220 g/m2)
7: Coated paper (221 to 300 g/m2)
8: Transparency
9: Textured paper
10, 11: Not used
12: Postcard
13: Labels
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV7, TR-CLR7, TR-DUP7, 2TR-
TGT7, 2TR-SHR7
5
5-231