Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 458

COPIER> ADJUST> HV-TR
TR-PPR4 Sec trns indiv setting paper type: set 4
Lv.2 Details To set the paper type (paper weight) for setting 4.
Setting 4 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV4,
TR-PPR4, TR-CLR4 and TR-DUP4. When this condition is satisfied,
the target current that is set in 2TR-TGT4 and paper allotted voltage
that is set in 2TR-SHR4 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs due to the paper type occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 13
1: Plain paper (64 to 105 g/m2)
2: Recycled paper (64 to 105 g/m2)
3: Thin paper (52 to 63 g/m2)
4: Heavy paper (106 to 220 g/m2)
5: Heavy paper (221 to 300 g/m2)
6: Coated paper (106 to 220 g/m2)
7: Coated paper (221 to 300 g/m2)
8: Transparency
9: Textured paper
10, 11: Not used
12: Postcard
13: Labels
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV4, TR-CLR4, TR-DUP4, 2TR-
TGT4, 2TR-SHR4
5
5-230
COPIER> ADJUST> HV-TR
TR-PPR5 Sec trns indiv setting paper type: set 5
Lv.2 Details To set the paper type (paper weight) for setting 5.
Setting 5 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV5,
TR-PPR5, TR-CLR5 and TR-DUP5. When this condition is satisfied,
the target current that is set in 2TR-TGT5 and paper allotted voltage
that is set in 2TR-SHR5 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs due to the paper type occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 13
1: Plain paper (64 to 105 g/m2)
2: Recycled paper (64 to 105 g/m2)
3: Thin paper (52 to 63 g/m2)
4: Heavy paper (106 to 220 g/m2)
5: Heavy paper (221 to 300 g/m2)
6: Coated paper (106 to 220 g/m2)
7: Coated paper (221 to 300 g/m2)
8: Transparency
9: Textured paper
10, 11: Not used
12: Postcard
13: Labels
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV5, TR-CLR5, TR-DUP5, 2TR-
TGT5, 2TR-SHR5