Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 522

COPIER> FUNCTION> PART-CHK
MTR Specification of operation Motor
Lv.1 Details To specify the Motor to operate.
Use case When replacing the Motor/checking the operation
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 1 to 21
1: Duplex Left Motor (M32)
2: Duplex Right Motor (M33)
3: Pre-registration Multi-purpose Tray Drive Motor (M36)
4: Registration Motor (M34)
5: Pre-fixing Feed Motor (M35)
6: Delivery Motor (M37)
7: Reverse Motor (M38)
8: Left Deck Pickup Motor (M42)
9: Right Deck Pickup Motor (M43)
10: Cassette 3 Pickup Motor (M44)
11: Cassette 4 Pickup Motor (M45)
12: Deck Pickup Motor (M1)
13: Decurler Feeding Motor 1 (M51)
14: Decurler Feeding Motor 2 (M52)
15: Cassette Vertical Path Motor (M39)
16: Right Deck Vertical Path Motor (M40)
17: Left Deck Vertical Path Motor (M41)
18: Vertical Path Upper Feed Motor (M002)
19: Vertical Path Lower Feed Motor (M003)
20: Horizontal Path Feed Motor (M004)
21: Deck Pickup Motor (M001)
During operation: ACTIVE, When operation finished normally: OK!
Default value 1
5
Related service mode COPIER> FUNCTION> PART-CHK> MTR-ON
MTR-ON Operation check of Motor
Lv.1 Details To start operation check of the Motor specified by MTR.
The operation automatically stops after operation of 5 seconds.
Use case When replacing the Motor/checking the operation
Adj/set/operate method Select the item, and then press OK key.
Caution While the Toner Container Drive Motor is active, be sure to remove
the Toner Container. Otherwise, toner leakage may occur in the
machine.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time 1 minute
Related service mode COPIER> FUNCTION> PART-CHK> MTR
5-294
COPIER> FUNCTION> PART-CHK
SL Specification of operation Solenoid
Lv.1 Details To specify the Solenoid to operate.
Use case When replacing the Solenoid/checking the operation
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 1 to 10
1: Delivery Flapper Solenoid (SL2)
2: Reverse Upper Wheel Detachment Solenoid (SL3)
3: Multi-purpose Tray Pickup Solenoid (SL4)
4: Right Deck Pickup Solenoid (SL5)
5: Left Deck Pickup Solenoid (SL6)
6: Cassette 3 Pickup Solenoid (SL7)
7: Cassette 4 Pickup Solenoid (SL8)
8: Multi Deck (Upper) Pickup Solenoid (SL9)
9: Multi Deck (Middle) Pickup Solenoid (SL10)
10: Multi Deck (Lower) Pickup Solenoid (SL11)
During operation: ACTIVE, When operation finished normally: OK!
Default value 1
Related service mode COPIER> FUNCTION> PART-CHK> SL-ON
SL-ON Operation check of Solenoid
Lv.1 Details To start operation check for the Solenoid specified by SL.
The operation stops after "ON for 0.5 sec" => "OFF for 10 sec" => "ON
for 0.5 sec" => "OFF for 10 sec" => "ON for 0.5 sec".
Use case When replacing the Solenoid/checking the operation
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time 1 minute
Related service mode COPIER> FUNCTION> PART-CHK> SL
T-5-54