Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 465

COPIER> ADJUST> HV-TR
TR-DUP4 Sec trns indiv setting feed side: set 4
Lv.2 Details To set the feed side for setting 4.
Setting 4 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV4,
TR-PPR4, TR-CLR4 and TR-DUP4. When this condition is satisfied,
the target current that is set in 2TR-TGT4 and paper allotted voltage
that is set in 2TR-TGT4 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 4
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided, 4: POD
Deck Lite
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV4, TR-PPR4, TR-CLR4, 2TR-
TGT4, 2TR-SHR4
TR-DUP5 Sec trns indiv setting feed side: set 5
Lv.2 Details To set the feed side for setting 5.
Setting 5 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV5,
TR-PPR5, TR-CLR5 and TR-DUP5. When this condition is satisfied,
the target current that is set in 2TR-TGT5 and paper allotted voltage
that is set in 2TR-TGT5 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 4
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided, 4: POD
Deck Lite
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV5, TR-PPR5, TR-CLR5, 2TR-
TGT5, 2TR-SHR5
COPIER> ADJUST> HV-TR
TR-DUP6 Sec trns indiv setting feed side: set 6
Lv.2 Details To set the feed side for setting 6.
Setting 6 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV6,
TR-PPR6, TR-CLR6 and TR-DUP6. When this condition is satisfied,
the target current that is set in 2TR-TGT6 and paper allotted voltage
that is set in 2TR-TGT6 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 4
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided, 4: POD
Deck Lite
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV6, TR-PPR6, TR-CLR6, 2TR-
TGT6, 2TR-SHR6
TR-DUP7 Sec trns indiv setting feed side: set 7
Lv.2 Details To set the feed side for setting 7.
Setting 7 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV7,
TR-PPR7, TR-CLR7 and TR-DUP7. When this condition is satisfied,
the target current that is set in 2TR-TGT7 and paper allotted voltage
that is set in 2TR-TGT7 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 4
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided, 4: POD
Deck Lite
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV7, TR-PPR7, TR-CLR7, 2TR-
TGT7, 2TR-SHR7
5
5-237