Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 532

COPIER> FUNCTION> MISC-P
USBH-PRT Output of USB device information report
Lv.1 Details To output information of the connected USB device in the form of a
report.
Adj/set/operate method 1) Place paper in Cassette 1.
2) Select the item, and then press OK key.
Caution Be sure to use A4/LTR size plain paper/recycled paper.
DISCHG Execution of discharge current control
Lv.2 Details To execute the discharging current control.
Use case When image failure occurs due to uneven YMC discharge.
Adj/set/operate method Select the item, and then press OK key.
Required time 20 seconds
Related service mode COPIER> DISPLAY> HV-STS> PRISMP-Y, PRISMP-M, PRISMP-C,
PRIMACV-Y, PRIMACV-M, PRIMACV-C, PRIACI-Y, PRIACI-M,
PRIACI-C
SPIT-EX Execution of toner ejection
Lv.2 Details To supply new toner by ejecting the toner in the Developing
Assembly.
Use this mode when the image density is low or coarseness occurs
on halftone image after the machine is left for a long time.
Use case When the image density is low or coarseness occurs on halftone
image after the machine is not used for a long time (e.g. summer
vacation)
Adj/set/operate method Select the item, and then press OK key.
DRUM-TH Drum Thermopile operation check
Lv.1 Details To check if the Drum Thermopile detects the surface temperature of
the Drum correctly.
The operation status and the surface temperature are displayed.
5
Use case When replacing the Drum Thermopile
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
-58 to 64
5-304
■ SYSTEM
DOWNLOAD
Lv.1 Details
Use case
Adj/set/operate method 1) Select the item, and then press OK key.
Caution
Display/adj/set range
Supplement/memo
CHK-TYPE
Lv.1 Details
Use case
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range
Related service mode
T-5-57 Supplement/memo
HD-CHECK
Lv.1 Details
Adj/set/operate method Select the item, and then press OK key.
Caution
Display/adj/set range
Related service mode
COPIER> FUNCTION> SYSTEM
Shift to download mode
To make the machine enter the download mode and wait for a
command.
Perform downloading by SST.
At upgrade
2) Perform downloading by SST.
Do not turn OFF the power before HOLD is displayed.
When waiting for a command: STAND-BY/STNDBY, In
communication: CONNECTED, Communication terminated: HOLD
SST: Service Support Tool
Specify HD-CLEAR/HD-CHECK partition No.
To specify the partition number of the HDD to execute HD-CLEAR/
HD-CHECK.
When executing HD-CLEAR/HD-CHECK
0 to 65535
0: Entire HDD
1: Image accumulation area
2: Universal file storage area
3: PDL file storage area
4: Program file storage area
5: MEAP application
6: Address book transfer setting
7: MEAP storage data
8: System log storage area
9: Advanced Box area
10: Area for distribution server
11: Storage area of universal data
COPIER> FUNCTION> SYSTEM> HD-CLEAR, HD-CHECK
Universal file: Management information of user setting data, various
log data, PDL spool data, and image data, etc.
Entire HDD check and recovery
To check the entire HDD and execute recovery processing.
Be sure to execute this item after CHK-TYPE.
During operation: Progress ratio (%), When operation finished
normally: OK!
COPIER> FUNCTION> SYSTEM> CHK-TYPE