Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 418

COPIER> ADJUST> CCD
MTF2-S2 MTF value 2 setting: vert scan [Front]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF2-S3 MTF value 3 setting: vert scan [Front]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF2-S4 MTF value 4 setting: vert scan [Front]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
5
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF2-S5 MTF value 5 setting: vert scan [Front]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF2-S6 MTF value 6 setting: vert scan [Front]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
5-190
COPIER> ADJUST> CCD
MTF2-S7 MTF value 7 setting: vert scan [Front]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF2-S8 MTF value 8 setting: vert scan [Front]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF2-S9 MTF value 9 setting: vert scan [Front]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
100DF2GB Img Sensr GB color displace crrct VL:bck
Lv.2 Details To correct the color displacement (G and B lines) in vertical scanning
direction due to the Scanner Unit (paper back).
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -256 to 256
Unit 0.001 line
Default value 0