Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 686

■ PRDC-1
COPIER> COUNTER> PRDC-1
PRM-WIRE Primary Charging Wire parts counter
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
Supplement/memo This is commonly used as operator maintenance parts counter.
PRM-GRID Grid Plate parts counter
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
PO-WIRE Pre-transfer Charging Wire parts counter
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
5
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
PRM-CLN Primary Charge Wire Clean Pad prts cntr
Lv.1 Details Primary Charging Wire Cleaning Pad 1, 2
1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
5-458
COPIER> COUNTER> PRDC-1
PO-CLN Pre-transfer Chg Wire Cln Pad prts cntr
Lv.1 Details Pre-transfer Charging Wire Cleaning Pad 1, 2
1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
PRM-CLN2 Prmry Charge Wire Cleanr Pad2 prts cntr
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
PO-CLN2 Pre-trn Chg Wire Clnr Pad2 parts cntr
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
PO-UNIT Pre-transfer Charging Ass'y parts cntr
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0