Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 174

E Detailed Occurance Items
code code area
E804 0023 -05 Title
Description
of detection
Measures
0024 -05 Title
Description
of detection
Measures
0030 -05 Title
Description
of detection
Measures
0031 -05 Title
Description
of detection
Measures
3
0032 -05 Title
Description
of detection
Measures
E843 0001 -05 Title
Description
of detection
Measures
E880 0001 -00 Title
Description
of detection
Measures
0004 -00 Title
Description
of detection
Measures
3-148
Description
Fan error
A failure was detected at the anti-adhesion fan 1 (FM23).
1. Check the connection of the connector.
2. Replace the anti-adhesion fan 1 (FM23).
Fan error
A failure was detected at the anti-adhesion fan 2 (FM24).
1. Check the connection of the connector.
2. Replace the anti-adhesion fan 2 (FM24).
Fan error
A failure was detected at the decurler suction fan (FM30).
1. Check the connection of the connector.
2. Replace the decurler suction fan (FM30).
Fan error
A failure was detected at the decurler side exhaust fan
(FM31).
1. Check the connection of the connector.
2. Replace the decurler side exhaust fan (FM31).
Fan error
A failure was detected at the decurler lower side exhaust
fan (FM32).
1. Check the connection of the connector.
2. Replace the decurler lower side exhaust fan (FM32).
Disconnection of the power supply plug for fixing
The product has two plugs, and the plug used to supply
power to the fixing assembly was disconnected. When
this error occurs, a message indicating that the plug is
disconnected is displayed.
Check the power supply plug for fixing.
Controller fan1 (FM19) Error
When detect a failure of the power supply cooling fan
1. Connector disconnection
2. Controller fan 1 (FM19) failure
Controller fan2 (FM20) error
When detect a failure of the power supply cooling fan
1. Connector disconnection
2. Controller fan 2 (FM20) failure
E Detailed Occurance Items
code code area
E880 0005 -00 Title HDD cooling fan (FM21) error
Description When detect a failure of the power supply cooling fan
of detection
Measures 1. Connector disconnection
2. HDD cooling fan (FM21) failure
E905 0001 -05 Title POD deck light air assist fan error
Description Even when the maximum LOW interval was passed,
of detection there was no change in the signal.
Measures 1. Failure of the shutter
2. Failure of the swing sensor (PS11)
3. Failure of the swing motor (M3)
4. Failure of the deck controller PCB (UN1)
0002 -05 Title POD deck pickup motor cooling fan error
Description The pickup motor cooling fan is not placed at LOCK ON
of detection status.
Measures 1. Check the connector of the pickup motor cooling fan
2. Replace the pickup motor cooling fan.
3. Replace the deck controller PCB.
0003 -05 Title POD deck pickup motor cooling fan error
Description The pickup motor cooling fan is not placed at LOCK OFF
of detection status.
Measures 1. Check the connector of the pickup motor cooling fan
2. Replace the pickup motor cooling fan.
3. Replace the deck controller PCB.
0010 -05 Title Failure of the air assist for Cassette 1 of the multi-
cassette deck
Description Even when the maximum LOW interval was passed,
of detection there was no change in the signal.
Measures 1. Displacement of the connector of the swing HP sensor
2. Failure of the swing sensor (S116).
3. Failure of the swing motor (M102).
4. Failure of the deck driver PCB.
5. Failure of the DC controller PCB in the host machine.
0011 -05 Title Failure of the air assist for Cassette 2 of the multi-
cassette deck
Description Even when the maximum LOW interval was passed,
of detection there was no change in the signal.
Measures 1. Displacement of the connector of the swing HP sensor
2. Failure of the swing sensor (S216).
3. Failure of the swing motor (M202).
4. Failure of the deck driver PCB.
5. Failure of the DC controller PCB in the host machine.
Description
(FM4).
(FM4).
(S116).
(S216).