Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 737

SORTER> ADJUST
PF-A4RZ1 Adj of A4R Z-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of A4R paper Z-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-A4RZ2 Adj of A4R Z-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of A4R paper Z-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-LDRZ1 Adj of LDR Z-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of LDR paper Z-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
SORTER> ADJUST
PF-LDRZ2 Adj of LDR Z-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of LDR paper Z-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-LGLZ1 Adj of LGL Z-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of LGL paper Z-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-LGLZ2 Adj of LGL Z-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of LGL paper Z-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
5
5-509