Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 142

E Detailed Occurance Items
code code area
E602 -0600 -00 Title
Description
of detection
Measures
E602 -0601 -00 Title
Description
of detection
Measures
3
E602 -0602 -00 Title
Description
of detection
Measures
E602 -0603 -00 Title
Description
of detection
Measures
3-116
Description
Hard disk failure
/TMP_GEN is abnormal
1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
3. If still not recovery, replace HDD and re-install system
based on judging HDD failure.
Hard disk failure
/TMP_GEN is abnormal
1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
3. If still not recovery, replace HDD and re-install system
based on judging HDD failure.
Hard disk failure
/TMP_GEN is abnormal
1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
3. If still not recovery, replace HDD and re-install system
based on judging HDD failure.
Hard disk failure
/TMP_GEN is abnormal
1. Input applicable CHK-TYPE into a partition; and
execute HDD-CHECK (requires several minutes to
some dozens of minutes); and then power cycle
2. If not recovery, input applicable CHK-TYPE into a
partition; and execute HDD-CLEAR; and then power
cycle
E Detailed Occurance Items
code code area
E602 -0604 -00 Title Hard disk failure
Description /TMP_GEN is abnormal
of detection
Measures 1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
3. If still not recovery, replace HDD and re-install system
E602 -0605 -00 Title Hard disk failure
Description /TMP_GEN is abnormal
of detection
Measures 1. Input applicable CHK-TYPE into a partition; and
2. If not recovery, replace HDD and re-install system
E602 -0610 -00 Title Hard disk failure
Description /TMP_GEN is abnormal
of detection
Measures This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
2. If not recovery, replace HDD and re-install system
E602 -0611 -00 Title Hard disk failure
Description /TMP_GEN is abnormal
of detection
Measures This is an error that usually does not occur at Read/Write
level.
1. Check a cable or power supply connector
2. If not recovery, replace HDD and re-install system
E602 -0612 -00 Title Hard disk failure
Description /TMP_GEN is abnormal
of detection
Measures This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
2. If not recovery, replace HDD and re-install system
Description
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
based on judging HDD failure.
execute HDD-CLEAR; and then power cycle
based on judging HDD failure.
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
based on judging HDD failure.
based on judging HDD failure.
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
based on judging HDD failure.