Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 574

COPIER> OPTION> IMG-FIX
TMP-C5C Adj coated ppr 5C print fix ctrl temp
Lv.2 Details To adjust the initial rotation temperature and print temperature 1 to 3
for "Coated 5" which paper weight is customized to 151 to 180g/m2.
Set a positive value when a fixing failure occurs.
In addition, use this mode when an image failure or deterioration of
gloss occurs.
Use 0 (initial value) in the normal operation.
Use case When a fixing failure, an image failure, or deterioration of gloss
occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
L-WAIT ON/OFF of standby:Press Belt temp rise
Lv.2 Details To set ON/OFF of standby mode at temperature rising of Pressure
Belt and the threshold value.
When setting to ON, the machine enters standby mode to cool down
when the temperature exceeds the specified temperature, so this
mode can prevent image error which occurs at temperature rising.
Use case When wrinkles or rain-like spots occur due to the temperature rising
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When ON is set, the machine may enter standby mode (approx. 30
seconds) due to temperature rising during a job.
Display/adj/set range 0 to 3
0:OFF, 1: ON (Judgment temperature table value), 2: ON (Judgment
temperature table value -3 deg C), 3: ON (Judgment temperature
5
table value -6 deg C)
Appropriate target value 0
Default value 0
LOW-NS ON/OFF of silent mode at shift to copy
Lv.1 Details To set whether to activate the Fixing Heat Exhaust Fan (FM6) in
silent mode when shifting from standby mode to copy mode.
When shifting from standby mode to copy mode, noise occurs
because the rotation speed of the Fixing Heat Exhaust Fan is
switched from 40% to 70%.
When 1 is set, the noise is alleviated by changing the timing of
switching the fan rotation speed (silent mode).
Use case Upon user's request (alleviation of noise when shifting to copy mode)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
5-346
■ IMG-TR
2TR-RVON
Lv.2 Details
Use case
Adj/set/operate method 1) Enter the setting value, and then press OK key.
Display/adj/set range
Default value
Related service mode
Related user mode
TR-BND1
Lv.2 Details
Use case
Adj/set/operate method 1) Enter the setting value, and then press OK key.
Caution
Display/adj/set range
Default value
Related service mode
T-5-61
COPIER> OPTION> IMG-TR
ON/OFF end edge white spot crrct scrn
To set whether to display the screen to set ON/OFF of the paper
trailing edge weak bias in user mode.
When 1 is set, trailing edge white spot correction screen is displayed
in user mode. If ON is set in this screen, weak bias is applied to
the paper trailing edge, and white spots at the trailing edge are
alleviated.
Upon user's request (when white spots occur at the trailing edge)
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
COPIER> OPTION> DSPLY-SW> IMGC-ADJ
Adjustment/ Maintenance> Adjust Image Quality> Tail End White
Patch Correct
ON/OFF of ITB toner supply at last rotn
At last rotation, the toner band formed on the ITB is removed by the
ITB Cleaning Blade to decrease the friction between them.
This is to set whether to form the toner band on the ITB at last
rotation.
When "0: OFF" is set, toner is not supplied at last rotation, and the
ITB Cleaning Blade might be flipped by friction.
Upon user's request (Reduction of toner consumption)
2) Turn OFF/ON the main power switch.
When OFF is set, the ITB Cleaning Blade might be flipped.
0 to 1
0: OFF, 1: ON
1
COPIER> OPTION> IMG-TR> TR-BND2, TRCLN1-P, TRCLN2-P