Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 325

COPIER> DISPLAY> HT-C
SGL-C-Y2 ARCDAT scrnC Y-patch current VL(1/2 SPD)
Lv.2 Details To display the current Y-patch value of screen C in ARCDAT control
at 1/2 speed.
When hue variation occurs and the value shown is not in the
tolerable range, check the Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
SGL-C-M2 ARCDAT scrnC M-patch current VL(1/2 SPD)
Lv.2 Details To display the current M-patch value of screen C in ARCDAT control
at 1/2 speed.
When hue variation occurs and the value shown is not in the
tolerable range, check the Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
SGL-C-C2 ARCDAT scrnC C-patch current VL(1/2 SPD)
Lv.2 Details To display the current C-patch value of screen C in ARCDAT control
at 1/2 speed.
When hue variation occurs and the value shown is not in the
tolerable range, check the Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
SGL-C-K2 ARCDAT scrnC Bkpatch current VL(1/2 SPD)
Lv.2 Details To display the current Bk-patch value of screen C in ARCDAT control
at 1/2 speed.
When hue variation occurs and the value shown is not in the
tolerable range, check the Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
COPIER> DISPLAY> HT-C
SUM-A-Y3 ARCDAT scrnA Y-clr ctrl differ (1/3 SPD)
Lv.2 Details To display Y-patch control difference of screen A in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen A: High screen ruling screen
SUM-A-M3 ARCDAT scrnA M-clr ctrl differ (1/3 SPD)
Lv.2 Details To display M-patch control difference of screen A in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen A: High screen ruling screen
SUM-A-C3 ARCDAT scrnA C-clr ctrl differ (1/3 SPD)
Lv.2 Details To display C-patch control difference of screen A in ARCDAT control
at 1/3 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset target
value). If not corrected, check Patch Sensor or replace the developer.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen A: High screen ruling screen
5
5-97