Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 602

COPIER> OPTION> CUSTOM
DEV-SP2 Device special settings 2
Lv.2 Details To execute the device special settings.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Unit bit
Default value 00000000
DEV-SP3 Device special settings 3
Lv.2 Details To execute the device special settings.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Unit bit
Default value 00000000
DEV-SP4 Device special settings 4
Lv.2 Details To execute the device special settings.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Unit bit
5
Default value 00000000
DEV-SP5 Device special settings 5
Lv.2 Details To execute the device special settings.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Unit bit
Default value 00000000
DEV-SP6 Device special settings 6
Lv.2 Details To execute the device special settings.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Unit bit
Default value 00000000
5-374
COPIER> OPTION> CUSTOM
DEV-SP7 Device special settings 7
Lv.2 Details To execute the device special settings.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Unit bit
Default value 00000000
DEV-SP8 Device special settings 8
Lv.2 Details To execute the device special settings.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Unit bit
Default value 00000000
T-5-72