Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 623

COPIER> OPTION> USER
CNCT-RLZ Setting of connection serialize function
Lv.2 Details Connection serialize is a function to assure job grouping function of
imageWARE Output Manager Select Edition V1.0.
The setting to enable this mode can avoid job rearrangement
because the machine does not receive job data from other
connection until it completes job data reception from the current
connection.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Supplement/memo Connection: Connection to be established through network between
multiple hosts (PC, etc).
Job grouping function: A function of imageWARE Output Manager
Select Edition V1.0 to prevent job interruption from other PC by
group job (sending multiple jobs in 1 session at job transmission).
COUNTER7 Setting of software counter 7
Lv.1 Details To set counter type for software counter 7 on the Counter Check
screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: Not registered
Default value 0
COUNTER8 Setting of software counter 8
Lv.1 Details To set counter type for software counter 8 on the Counter Check
screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: Not registered
Default value 0
2C-CT-SW Set of color counter at 2-color mode
Lv.2 Details To set whether to use the mono color counter or full color counter for
count-up in 2-color mode.
Display/adj/set range 0 to 1
0: Mono color counter, 1: Full color counter
Default value 0 (Japan)/1 (Others)
COPIER> OPTION> USER
JA-FUNC ON/OFF of job archive function
Lv.2 Details To set ON/OFF of job archive function.
Caution Changing this mode is not available in service mode, but only
reference is available.
This mode can be set only with the MEAP program that supports job
archive.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
JA-JOB Setting of job archive target job
Lv.2 Details To set the job type subject to job archive.
With the job archive function enabled, archive operation is executed
when executing the target job.
Caution Changing this mode is not available in service mode, but only
reference is available.
This mode can be set only with the MEAP program that supports job
archive.
Display/adj/set range 0: N/A, 3: Limited to FAX/IFAX, 0xFFFFFFFF: All jobs
Default value 0
Related service mode COPIER > OPTION > USER > JA-FUNC
JA-RESTR Setting of job archive limit items
Lv.2 Details To set restriction items for job archive specification.
With job archive function enabled, follow the setting to execute
operation to restrict specification.
Caution Changing this mode is not available in Service Mode, but reference
is available (in Service mode).
This mode is available only with the MEAP program that supports job
archive.
Display/adj/set range 0 to 1
0: OFF, 1: ON
32 specification restrictions with Bit definition
Bit0: Function to obtain image file (0: OFF, 1:ON)
Bit1: Function to compose form registration (0: OFF, 1: ON)
Bit2: Function to edit document (0:OFF, 1: ON)
Default value 0
Related service mode COPIER > OPTION > USER > JA-FUNC
5
5-395