Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 688

■ DRBL-1
COPIER> COUNTER> DRBL-1
TR-BLT ITB parts counter
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
2TR-ROLL Sec Transfer Outer Roller parts counter
Lv.1 Details Secondary Transfer Outer Roller
1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
Supplement/memo This is commonly used as operator maintenance parts counter.
TR-STC-H Sec Transfer Static Eliminator prts cntr
Lv.1 Details Secondary Transfer Static Eliminator
1st line: Total counter value from the previous replacement
5
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
2TR-INRL Sec Transfer Inner Roller parts counter
Lv.1 Details Secondary Transfer Inner Roller
1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
5-460
COPIER> COUNTER> DRBL-1
ITB-BLD1 ITB Cleaning Blade parts counter
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
PT-DRM Bk Photosensitive Drum parts counter
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
CLN-BLD Drum Cleaning Blade (Bk) parts counter
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
DV-UNT-C Developing Assembly (C) parts counter
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0