Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 202

Alarm Code Title
75 - B11E Failure in transfer of video
data from an external
controller
75 - B11F Failure in transfer of video
data from an external
controller
75 - B120 Failure in transfer of video
data from an external
controller
85 - 0001 Scanning input timeout error
3
85 - 0002 Scanning input encode error
85 - 0003 Scanning input encode error 2 Remove and place the document, decrease the
85 - 0004 Scanning input VSync error
85 - 0005 Scanning input HSync error
85 - 0006 Image processing timeout
error
85 - 0007 Image processing transfer
error
3-176
A. movement /B. cause /C. measures
When a video data transfer error occurred,
retransmission of the video data is internally performed,
so no measures need to be taken.
However, when retransmission is performed over a
specified number of times, the corresponding job is
cancelled.
When a video data transfer error occurred,
retransmission of the video data is internally performed,
so no measures need to be taken.
However, when retransmission is performed over a
specified number of times, the corresponding job is
cancelled.
When a video data transfer error occurred,
retransmission of the video data is internally performed,
so no measures need to be taken.
However, when retransmission is performed over a
specified number of times, the corresponding job is
cancelled.
Remove and place the document, decrease the
sharpness level, and perform printing again.
If this alarm occurs frequently, check the connection of
the DDIS video cable, replace the reader, and replace
the video controller 2.
Remove and place the document, decrease the
sharpness level, and perform printing again.
If this alarm occurs frequently, check the connection of
the DDIS video cable, replace the reader, and replace
the video controller 2.
sharpness level, and perform printing again.
If this alarm occurs frequently, check the connection of
the DDIS video cable, replace the reader, and replace
the video controller 2.
Remove and place the document, decrease the
sharpness level, and perform printing again.
If this alarm occurs frequently, check the connection of
the DDIS video cable, replace the reader, and replace
the video controller 2.
Remove and place the document, decrease the
sharpness level, and perform printing again.
If this alarm occurs frequently, check the connection of
the DDIS video cable, replace the reader, and replace
the video controller 2.
When an error retry failed three times, E747-6xxx/7xxx
is displayed.
When an error retry failed three times, E747-6xxx/8xxx
is displayed.
Alarm Code Title
85 - 0008 Illegal packet error When an error retry failed three times, E747-3xxx is
displayed.
85 - 0009 Process instruction error When an error retry failed three times, E747-3xxx is
displayed.
A. movement /B. cause /C. measures
T-3-30